ANCEL BA101 Battery Tester
ANCEL BA101 Battery Tester
- Conductance correlates directly to the battery capacity.
- Passive testing method is safe.
- Never discharges or drain the battery.
- Able to test condition of discharged battery.
- Consistent and repeatable results.
- Provides unique indication of battery conditions.
- Provides check the Alternator’s charging and Starter’s cranking conditions. It is maintenance free and no internal batteries required.
- Powers up when connected to the battery posts during testing.
Ancel BST500 Battery Tester with Thermal Printer
Ancel BST500 Battery Tester with Thermal Printer
The Ancel BST500 is a more advanced Tool with the ability to test automotive batteries, difficulties, motorcycles, boats and trucks. Designed for testing 12V batteries, but can be used for 12V and 24V starting and charging systems.
- Fast and accurate, displays battery parameters in about 2.5 seconds to notify you of full/low battery or charge/replace battery status
- The unit is housed in a rugged casing for easy handling. It’s lightweight and has a backlit display for clear reading in any lighting condition
MITECH MHBS-3000-XYZ Automatic Brinell Hardness Tester
MITECH MHBS-3000-XYZ Automatic Brinell Hardness Tester
Mitech MHBS-3000-XYZ Automatic Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation, The use of photoelectric sensor system to high magnification optical measurement, equipped with automatic turret device, high sensitivity touch screen operation interface, can achieve automatic loading and unloading of electronic, automatic indentation marks, microscopic auto focus measurement indentation diameter, GB / ASTM hardness automatic conversion, automatic test report and other functions, easy to operate, high detection efficiency. It can meet the hardness testing requirement for the quality control and qualified assessment of the workpiece sample.
MITECH MHBRVU-187.5 II Advanced Optical Hardness Tester
MITECH MHBRVU-187.5 II Advanced Optical Hardness Tester
Mitech MHBRVU-187.5II advanced optical hardness tester, based on the mechanical principle of diamond or spherical cemented carbide indenter pressing into the sample surface to produce indentation, realizing Brinell, Rockwell, Vickers three different materials hardness measurement by measuring the depth or diameter of the indentation. With novel appearance, full-featured, Rockwell hardness value can be directly read by the optical projection screen, Vickers, Brinell hardness values need to look up the table, easy operation, it can meet the needs of users of a variety of hardness testing.
MITECH MHBRV-187.5 Electric Multifunctional Hardness Tester
MITECH MHBRV-187.5 Electric Multifunctional Hardness Tester
Mitech MHBRV-187.5 electric multifunctional hardness tester, based on the mechanical principle of positive pyramid diamond or spherical cemented carbide indenter pressing into the sample surface to produce indentation, realizing Brinell, Rockwell, Vickers three different materials hardness measurement by measuring the depth or diameter of the indentation.
MITECH MHBS-62.5 Digital Display Small Load Brinell Hardness Tester
MITECH MHBS-62.5 Digital Display Small Load Brinell Hardness Tester
Mitech MHB-62.5 Digital Display Small Load Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation. It’s MITECH latest optical mechanical and electrical integration of high-tech products.
MITECH MHBRVS-187.5 Digital Brinell Rockwell & Vickers Hardness Tester
MITECH MHBRVS-187.5 Digital Brinell Rockwell & Vickers Hardness Tester
Mitech MHBRVS-187.5 digital multifunctional hardness tester, based on the mechanical principle of conical diamond or spherical cemented carbide indenter pressing into the sample surface to produce indentation, realizing Brinell, Rockwell, Vickers three different materials hardness measurement by measuring the depth or diameter of the indentation.
MITECH MHBS-3000Z Brinell Hardness Tester
MITECH MHBS-3000Z Brinell Hardness Tester
Mitech MHBS-3000Z Touch Screen Automatic Tower Digital Display Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation, The use of photoelectric sensor system to high magnification optical measurement, equipped with automatic turret device, high sensitivity touch screen operation interface, can achieve automatic loading and unloading of electronic, easy to operate, high detection efficiency.
MITECH MHB-3000 Electronic Brinell Hardness Tester
MITECH MHB-3000 Electronic Brinell Hardness Tester
MITECH MHB-3000 Brinell Hardness Gauge is a measuring device used based on the mechanical principle of a hard alloy indenter pressing into the sample surface to produce an indent, realizing the measurement of the hardness of the material by measuring the indentation diameter, it is novel and high reliable with accurate measurement. This device features eight digital tube LED and luminous secondary tube display, simple operation, which can visually display the test results to meet the hardness testing requirements for quality control and qualified assessment of the workpiece sample.
MITECH MHBS-3000 Digital Display Brinell Hardness Tester
MITECH MHBS-3000 Digital Display Brinell Hardness Tester
MITECH MHBS-3000 Digital Display Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation.It is novel and high reliable with accurately measurement. With LED display, simple operation, it can visually display the test results to meet the hardness testing requirement for the quality control and qualified assessment of the workpiece sample.
