Extech EC505 ExStik® Replacement pH Electrode/Conductivity Cell Module
Extech EC505 ExStik® Replacement pH Electrode/Conductivity Cell Module
The EC505 is an ExStik® Replacement pH Electrode/Conductivity Cell Module. For use with the Extech EC500 Waterproof ExStik® II pH/Conductivity Meter. Measures conductivity, TDS, salinity, pH and temperature. Comes with a year warranty.
CEM DT-128 Pinless Moisture Meter
CEM DT-128 Pinless Moisture Meter
- Sensor Type metal spheroid
- Measuring Range 0 to 100 digit
- Depth of penetration about 20-40mm
- Low battery indication
- MAX/MIN Function
- Auto Power Off
- White Backlit LCD Display
CEM DT-128M Pinless Moisture Meter
CEM DT-128M Pinless Moisture Meter
128M/128H is the NON-Contact Moisture Meter,It is an electronic dampness indicator with a measuring process working on the principle of high frequency. The instrument is used for non-destructively tracing dampness in building materials of all kinds as well as for detecting damp distribution in walls , ceilings and floors. It is particulary suitable for pre-testing the readiness of building materials for covering prior to CM measurement.
CEM DT-171 Temperature and Humidity Data Logger
CEM DT-171 Temperature and Humidity Data Logger
- Records 32000 Data Points, 16000 each for temperature & Humidity
- Freely selectable measuring cycle from 2 Sec to 24 Hours
- High Battery Life
- Displays all status information through two LED’s
- Download collected data through USB PC Interface
- Temperature Measurement in both Celsius and Fahrenheit Scales
- Alarm Display if user-defined maximum / minimum values are exceeded
- Analysis software used to view graph for logging data
CEM LDM-100H Laser Distance Meter
CEM LDM-100H Laser Distance Meter
- Laser used for showing the target measured
- Area measurement
- Volume measurement
- Single measurement mode
- Max/Min measurement records
- Backlit LCD Display
- Indirect measurements can be done
CEM IR-68 Multifunction InfraRed Thermometers
CEM IR-68 Multifunction InfraRed Thermometers
- Range -50ºC to 600ºC/-58ºF to 1112ºF
- Response time Less than 1s
- DT-8810 Series and IR-68 Non-contact IR Thermometers are multifunctional and low cost, provide quick non-contact wide range temperature measurements
- Targeting objects are easy with the bright laser beam
- Built-in laser pointer identifies target area
CEM DT-1880 Hot Wire Anemometer with Datalogger
CEM DT-1880 Hot Wire Anemometer with Datalogger
DT-1880 Hot Wire Anemometer makes a step forward for you into the field of precision measurement. Telescoping probe is ideal for measuring in HVAC ducts and other small vents; extends up to 20m/s.
- LED backlight
- Auto power off
- Low-battery indication
CEM DT-850 Thermo-Anemometer
CEM DT-850 Thermo-Anemometer
- DT-850 CFM/CMM Thermo-Anemometer remote sensor is the most popular model for HVAC applications
- Resolution of 0.01m/sec
- 20 points average for Air Flow
- Super large LCD Backlit Display
- 3% velocity accuracy via low friction 2.83″D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Low battery indication and Auto Power Off
CEM GD-3308 Gas Leak Detector
CEM GD-3308 Gas Leak Detector
CEM GD-3306/3308 Gas Leak Detector detects the presence of flammable gas and measures concentrations between 0~10,000 parts per million (PPM).
- Range 0~10000ppm(methance)
- LCD Type Display
- Vibration Alarm Standard
- Warm Up Time 40 seconds
- Response Time <2 seconds
CEM DT-8851 Sound Level Meters
CEM DT-8851 Sound Level Meters
DT-8851/8852 Sound Level Meters are designed for noise project, quality control, illness prevention & cure and all kinds of environmental sounds measurements. It is applied to the sounds measurement at factory, school, office, traffic access and household etc.
- Accuracy ±1.4dB
- Frequency range 31.5HZ ~ 8KHZ
- Dynamic range 50dB
- Resolution 0.1dB
- Analog output AC/DC outputs, AC=1Vrms, DC=10mV/dB