Sanwa HG561H Insulation Tester
Sanwa HG561H Insulation Tester
- Electrical circuit not more than Low voltage 600V,
- Insulation resistance of Electric installation, voltage measurement(DC/AC auto detect),
- Resistance measurement, and Continuity check
- Automatically-held readings after measuring MΩ
- The LED level meter shows the reading
- The instrument makes only necessary voltages enabled between 15V, 25V, 50V, 100V, 125V, 250V, and 500V
- Easy-to-read LCD with the fixed decimal point
- Provides the probe that enables you to measure through a hole of a circuit breaker cover
- The lighting lamp illuminates a place to be measured, and the LCD has a backlight.
Sanwa DLC460F Clamp Meter
Sanwa DLC460F Clamp Meter
The DCL460F has max/min hold function for holding the maximum or the minimum readings on the screen, as well as a hold function for holding or pausing a reading on the screen. The instrument also features an ACA LPF (Low Pass Filter) function that attenuates high frequencies to reduce noise for accurate readings.
Sanwa DCM600DR Clamp Meter
Sanwa DCM600DR Clamp Meter
- AC / DC current measurable max. 600A
- True RMS
- Peak hold
When the peak button is pressed, the measuring range will be fixed to the 600A range. - Relative value measurement
- Data hold, Auto power save
- LCD with back light
Sampling rate : 3 times / sec. for numeral display,
Sanwa DCM2000DR Clamp Meter
Sanwa DCM2000DR Clamp Meter
- Dual display shows voltage/current and its frequency
- True RMS
- EF (Electric Field) sensing
- VFD (Variable Frequency Drive) frequency measurement
- Low input impedance voltage measurement capable of attenuating the effects of ghost voltage
- Data hold, Range hold
- Relative value
- Peak hold (5msec.)
- Auto Power Save (30min.) (cancelable)
- Sampling rate : approx. 5 times / sec
Sanwa DCL31DR Clamp Meter
Sanwa DCL31DR Clamp Meter
The DCL31DR can measure current up to 400 Amps in AC and DC mode with 3% accuracy when in AC mode. The DCL31DR offers many features such as a large 6000 count LCD display with backlight, a Data Hold function to pause on-screen measurements, a Peak Hold function to detect peak values of AC current to pause it, and a Zero setting feature that allows users to clear the DC offset before measuring DC current.
Sanwa DCM660R Clamp Meter
Sanwa DCM660R Clamp Meter
- AC current measurable max. 660A
- True RMS
- Inrush current measurement
- Max/Min value hold
- Frequency measurement by clamping and using test lead
- Data hold, Auto power save
- LCD with back light
- Sampling rate : 3 times / sec. for numeral display
Sanwa DCM60R Clamp Meter
Sanwa DCM60R Clamp Meter
- True RMS
- Measurable AC 0.1A~600A
- ACV & Resistance measurement
- Small Design & easy to carry
- Data hold
- Continuity check buzzer
- Sampling rate : approx.2 times / sec.
- AC frequency bandwidth : 50~400Hz
Sanwa DCL3000R Clamp Meter
Sanwa DCL3000R Clamp Meter
- Flexibility facilitating conductor clamping even in narrow space
- AC current measurable max. 3000A
- True RMS
- Data hold, Max/Min value hold
- Backlight
- Sampling rate : approx. 2 times / sec.
Sanwa DCL1200R Clamp Meter
Sanwa DCL1200R Clamp Meter
- Lightweight approx. 290g
- True RMS
- Large LCD with Backlight
- Easy to use large size data hold button
- AC voltage detection function (EF)
- Auto V / Ω detection
- MAX. 1200A measurable
- Display : numeral display 6000
- Sampling rate : 5 times / sec.
- AC frequency bandwidth : 50 / 60Hz
Sanwa DCM400AD Clamp Meter
Sanwa DCM400AD Clamp Meter
- 4000 count / 42 segment analog bar graph
- DC / AC current 40A/400A
- Data hold / Range hold
- Relative value
- Continuity check buzzer
- Auto power off (30min.)
- Low battery power indication
- Display : numeral display 3999, bar graph 42 segments
- Sampling rate : 2 times / sec. 20 times / sec. for bar graph
- AC frequency bandwidth : 50〜500Hz