Product Description

Alinco DJ-195/196

Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/196 sports an alphanumeric display for easy memory management. It has an ergonomic design that’s “user friendly” and the 5 watt output battery is standard. You’ll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/196 retains the proud Alinco tradition of quality construction and excellent value.

Features Alinco DJ-195/196

Alphanumeric display
40 memory channels
5 watt output with standard battery
CTCSS encode+decode and DCS
13.8 VDC direct input with battery charge feature
Direct frequency input
S-meter
Autodialer
Cable Cloning
Computer programmable (third party software required)
MARS/CAP capability (DJ-195T/196T)
Additional features, including theft alarm!
Back-lit keypad (DJ-196T Only)

Alphanumeric Display			Label channels in an easy-reading format. Display frequency, alpha label or channel number only.
40 Memory Channels			Plenty of room to store your favorite simplex or repeater frequencies along with alphanumeric label, offset, CTCSS encode/decode or DCS setting.
5 watts output			The standard battery allows the DJ-195/196 to produce up to 5 watts. A power input port. Accepts 13.8 VDC and charges the battery, but won’t allow destructive overcharge.
CTCSS, DCS, Tone Bursts and DTMF			Be prepared for virtually any selective calling situation or gaining access to repeaters with protected inputs. European Tone Bursts include 1000, 1450, 1750 and 2100 Hz.
Direct Frequency Input			Frequency entry is easy using the well-spaced keypad.
S-Meter			Displays relative signal strength.
Cable Cloning			Share identical settings among multiple DJ-195/196 transceivers. Saves time and ensures uniform operation.
Removal Alarm			The DJ-195/196 can be set to emit a tone when disconnected from an external power source until proper action is taken to silence the alarm.
Experimental Insect Repel Feature			Can the DJ-195/196 actually repel mosquitoes? Activate the special tone and decide for yourself! You may find the DJ-195/196 can “de-bug” your outdoor operating site!

Specifications Alinco DJ-195/196

General
Frequency RX original status			130 to 174 F2 F3 only
F2,F3,WFM
Frequency TX			F3 144-147.995
Frequency Stability			+/-5 ppm(-10 to +60c)
Antenna Imp.			50 ohm unbalanced
Supply Voltage			DC 13.8V rated DC 6.0min to 16V max
Ground			Negative GND
Current consumption			TX 5W 1.2A approx
at 13.8V external source			RX 200mA approx/300mW RX squelched 50mA approx RX Batt.Save on 20mA app
Operating Temperature range			-10 to +60 degrees C.
Dimention w/o projection			56(W) x 124(H) x 40 (D)
Weight with drycellcase+cell and antenna			N/a
Transmitter
Output power			5W 13.8V or EBP48N Low=0.5W
Modulation			Variable reactance
Max. Deviation			n/a
Spurious emission			less than -60db
Microphone Imp.			2k ohms approx
Receiver
Circuit			Double superheterodyne
1st IF frequency			21.7Mhz
2nd IF frequency			450khz
Sensitivity 12db SINAD			better than -8dbu (0.2uV or less)
Selectivity except WFM			more than -6db/12khz less than -60db/28khz
Image/spurious response			less than -60db
AF out at 10% distort.13.8V			Max 300mW
AF impedance			8 ohms
Standard feature
Expandible RX range			none
MARS/CAP mod.			Yes
DTMF			tone encode
DCS SQ			enc/dec
CTCSS SQ			Enc/Dec 39tones
Memory ch.			40ch non expandible
Auto Dialer memory			memory 9 memories, max 16 characters/memory
Call channel			Yes