Product Description

Hanna HI-96753 Chloride Portable Photometer

Karya Mandiri Techindo has a wide range of Hanna products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

The HI96753 portable photometer is for the measurement of chloride. Hanna’s portable photometers feature an advanced optical system; the combination of a light emitting diode (LED), a narrow band interference filter, and silicon photodetector ensure accurate photometric readings every time. The Hanna exclusive CAL Check^™ feature utilizes ready-made, NIST traceable standards to verify both meter validation and calibration. The exclusive cuvette locking system ensures that the cuvette is inserted into the measurement cell in the same position every time to maintain a consistent path length.

Features at-a-glance

CAL Check^™
Allows for performance verification and calibration of the meter using a CAL Check NIST traceable secondary standard.

GLP
Records the date of the last user calibration performed.

Built in timer
Allows the use of a timer to ensure the appropriate 3 minutes and 30 seconds reaction time is used for the chemical reaction. At the end of the timer countdown the meter will automatically take the reading. This feature ensures consistency across multiple users.

Indexing indent on meter
The meter has an indent that allows for a lock and key fit with the cuvette cap. This ensures that the cuvette is indexed consistently (same position) in order to maintain the same path length for accurate results.

Cooling Lamp Indicator
It is necessary to maintain a consistent temperature of the optical components in order to maintain a narrow wavelength band of light. This photometer has a cooling lamp indicator that is displayed for a short period of time before each measurement in order to allow the components to cool and obtain the highest accuracy possible.

Error messages
Messages on display alerting to problems including no cap, over range and under range readings, and light source error.

Auto-shut off
Automatic shut off after 10 minutes of non-use when the meter is in measurement mode. Prevents wastage of batteries in the event the meter is accidentally not turned off.

Battery status indicator

The instrument has a battery level indicator to display reaming life as follows:

3 lines for 100 % capacity
2 lines for 66 % capacity
1 line for 33 % capacity
Battery icon blinks when the capacity is less than 10 %.

Units of measure
Appropriate unit of measure is displayed along with reading.

As one of the major inorganic anions in water and wastewater, chloride is often measured in a variety of industries. Due to its corrosive nature, chloride levels are monitored in boiler systems and cooling towers to prevent metal parts from being damaged. Not known to be toxic to humans, chloride is monitored in drinking water for aesthetic purposes due to its negative affect on taste. However, chloride can be toxic to plant life. Chloride may be monitored in agricultural applications in certain areas of the world where salinity levels are known to be naturally high.

The HI96753 uses an adaptation of the mercury (II) thiocyanate method to measure chloride concentrations of less than 20.0 mg/L (ppm). When both the mercury (II) thiocyanate and iron based reagents are added to samples containing chloride, the sample will turn an orange hue; the greater the concentration, the deeper the color. The associated color change is then colorimetrically analyzed according to the Beer-Lambert Law. This principle states that light is absorbed by a complementary color, and the emitted radiation is dependent upon concentration. For chloride determination, a narrow band interference filter at 466 nm (blue) allows only blue light to be detected by the silicon photodetector and omits all other visible light emitted from the LED. As the change in color of the reacted sample increases, absorbance of the specific wavelength of light also increases, while transmittance decreases.

The HI96753 is available as a kit (HI96753C) which includes

Portable Photometer
Sample cuvettes (2)
Caps
CAL Check™ standards with certificate
Cuvette cleaning cloth
Scissors
Rugged carrying case ( Carrying case has thermoformed insert for meter and accessories )

*Reagents ordered separately

CAL Check™ standards with certificate

The HI96753-11 CAL Check^™ standards are used for calibration and performance verification of photometers with the CAL Check^™ function.

Supplied with Certificate of Analysis

Lot number
Expiration date
Standard value @ 25 °C
Reference meter NIST traceable

Provided storage containers

Light tight
Protects from accidental breakage

Specifications Hanna HI-96753 Chloride Portable Photometer


SKU	HI96753-web
Product Name	Chloride Portable Photometer – HI96753
Quote Required	Yes
Chloride Range	0.0 a 20.0 mg/L (ppm)
Chloride Resolution	0.1 mg/L (ppm)
Chloride Accuracy	±0.5 mg/L ±6% de la lectura
Chloride Method	Adaptación del método de tiocianato de mercurio (II)
Total Chlorine Range	0.000 to 0.500 mg/L
Total Chlorine Resolution	0.001 mg/L (ppm)
Total Chlorine Accuracy	±0.020 mg/L ±3% of reading
Chlorine Method	adaptation of the USEPA method 330.5
Photometer/Colorimeter Light Source	tungsten lamp
Photometer/Colorimeter Light Detector	silicon photocell with narrow band interference filter @ 525 nm
Battery Type/Life	9V battery
Automatic Shut-Off	after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder
Environment	0 to 50°C (32 to 122°F); RH max 95% non-condensing
Weight	360g (12.7oz.)
Dimensions	193 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Ordering Information	HI96761 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality certificate, and instruction manual.