Hanna PCA 340 Chlorine, pH, ORP, and Temperature Analyzers

Categories , , Brand
Share on email
Share on twitter
Share on facebook

Product Description

Hanna PCA 340 Chlorine, pH, ORP, and Temperature Analyzers

Implements the DPD colorimetric method to determine free or total chlorine concentration

  • One point calibration of photometric cell
  • Up to two point pH calibration and in-line pH electrode calibration support
  • Control time cycles adjustable between 3 to 90 minutes
  • Proportional control of chlorine concentration
  • Proportional control of pH monitoring
  • Out of range measurement and self-diagnostic system alarms
  • Parameter control through analog output or dedicated relays
  • Logging space of up to of 3500 measurements and alarm status
  • Multi-language support
  • RS485 connectivity
  • pH probe sold seperarelty


The HANNA PCA 300 series models are chlorine, pH, ORP and temperature process analyzers which continuously monitor a sample stream and control the dosing to adjust the chlorine, bromine or iodine content and pH.

From drinking and wastewater treatment to the pool and spa sanitation, the monitoring of chlorine, bromine or iodine levels has an important bearing on public health as well as ROI and efficiency for heating system and industrial applications.

The PCA 3X0 series monitors the free chlorine or total chlorine in the 0 to 5.0 mg/L range;

In the DPD Colorimetric method, N, N-Diethyl-p-phenylene-Diamine indicator and a buffer are mixed with the sample. Free available chlorine oxidizes the DPD indicator reagent at a pH between 6.3 and 6.6 to form a magenta colored compound. The intensity of the resulting color is proportional to the concentration of chlorine in the sample. The purpose of the buffer solution is to maintain the proper pH.

In total chlorine measurement (free available chlorine plus combined chloramines), potassium iodide is added. The chloramines in the sample cause the iodide ions to become iodine which reacts with free chlorine to oxidize the DPD indicator. A pH of 5.1 is required for this reaction. Thus total chlorine measurements require a different buffer solution containing potassium iodide. Once the chemical reaction is completed, the optical signal at 555 nm is compared to the signal measured through the sample before the reagents were added. From these measurements chlorine concentration is calculated and shown on the display.

Indicator and buffer reagent bottles are placed directly into the instrument case. With a sampling period of 5 minutes, reagents need only to be replenished about once a month.
HANNA has designed our new analyzers PCA 32X and PCA 33X with pH control and temperature and pH control, ORP monitoring and temperature respectively.

PCA 320, PCA 330 and PCA 340 use the HI 1005 pH probe to continuously measure the pH of the sample stream in the range of 0 to 14 pH. The sample temperature is measured in the 5 to 75°C range. pH and temperature are displayed on the front panel, and the pH value is temperature compensated.

Measurement and Control Cycle

The PCA has a control time cycle that can be set by the user according with the dimensions of the controlled system. The control process, dosing commands and alarms can be performed according to this time cycle. The range of cycle timing is from 3 to 90 minutes.

Chlorine Control

Four chlorine level set points can be adjusted by the operator: a proportional dosing set point, two alarm set points and a minimum level for dosing. The proportional dosing factor (1/?) is user selectable with a delta between 0.1 and 2 pH. Chlorine/ bromine/iodine dosing system controls a SPST relay. Each alarm can be enabled or disabled.

pH Control

Three pH level set points can be adjusted by the operator: a control set point and two alarm set points. The pH control mode is user selectable; on/off or proportional dosing. The proportional dosing factor (1/?) is user selectable with a delta between 0.1 and 2 pH. The on/off dosing hysteresis is user selectable between 0.05 and 2.00 pH. The pH dosing system controls a SPST relay.

Analog Output

Two current outputs of 4-20 mA or 0-20 mA are available to drive external devices such as chart recorders. The analyzer can drive two dosing pumps through the 4-20 mA outputs for chloride and acid/alkali dosing. The analog output is fully programmable and can be proportional with chlorine concentration, pH and temperature value. The limits of the analog output is selectable for each parameter.


The analyzers can store up to 3500 readings (at least 7 days at 3 minutes sampling interval), that can be available for consulting or downloading. Logged records contain the time stamp, full information about the parameter values and the alarm status at the time.

Alarm and Warning System

Through the system, users have the ability to enable or disable the low and high level of alarms for all parameters. The system also offers overdosing protection that generates an alarm if something within the system is not working properly. The system will stop processes until the error is corrected by the user. Time is displayed on the main panel and time related reminders are available for “old calibration”, “reagent expired”, and “SIM expired”. All these warnings are generated based on user settings.


These controllers are offered in an easy to access, wall mounted casing that offers outstanding chemical, mechanical and temperature resistance.

Order Information:
Each PCA 300 series model is supplied with reagent bottles (2), reagent caps (2), 1 DPD compound powder, tubing and instructions. (Probes are sold Separately)

PCA 340-2 Free & total chlorine analyzer/control, pH control, temperature (230V)

Specification Hanna PCA 340 Chlorine, pH, ORP, and Temperature Analyzers

 Range 0.00 to 5.00 mg/L (ppm)
 Resolution 0.01 mg/L (ppm)
 Accuracy ±8% or ±0.05 mg/L whichever is greater
pH PCA320, PCA330 & PCA340 only
 Range 0.00 to 14.00pH
 Resolution 0.01pH
 Accuracy ±0.05pH
ORP PCA330 only
 Range 0 to 2000 mV
 Resolution 1 mV
 Accuracy ±1 mV
TEMPERATURE PCA320, PCA330 & PCA340 only
 Range 5°C to 75.0°C
 Resolution 0.1°C
 Accuracy ±0.5°C
ANALOGUE OUTPUT – PCA340 only (2) 4-20mA, 0-20mA for recorder or dosing


Hanna PCA 340 Chlorine, pH, ORP, and Temperature Analyzers Manual



Jual Hanna PCA 340 Chlorine, pH, ORP, and Temperature Analyzers dengan harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah Indonesia.

Jika anda butuh penawaran dan info Stok silahkan hubungi sales kami di No Telpon 0821 2742 8667 Telpon/SMS/Whatsapp.

Karyamandiritechindo.com Supplier dan Distributor Hanna Instruments di Indonesia. Karyamandiritechindo.com menyedikakan juga berbagai merk Alat ukur & Lab, Alat Survey, Alat komunikasi dan GPS

Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.

Product Enquiry

PT. Kencana Lestari Semesta
PT. Kencana Lestari SemestaIbu Sese
Read More
Saya sangat puas dengan pelayanan karyamandiritechindo.com. Kualitas barangnya bagus, ada potongan harga dan aman, pengiriman cepat sampai & paketnya sangat rapi.
PT.Dwi Satria Mekasindo
PT.Dwi Satria Mekasindo Ibu Denis Adelin
Read More
Sebenarnya sudah beberapa kali saya belanja online di beberapa toko online. Ini pertama kali saya belanja di karyamandiritechindo.com, perbedaan yang saya rasakan dari belanja sebelumnya adalah dari segi pelayanannya.
Bapak Anton
Bapak Anton Papua
Read More
HT NYA ORIGINAL, sudah di test 4 pcs, produk berfungsi dengan baik, respon penjual cepat, dan mau bantu kalau barang ada problem. Deg2an beli 4pcs langsung Puji Tuhan barang sampai dengan selamat. Terimakasih karyamandiritechindo.com.
PT. AQPA Indonesia
PT. AQPA IndonesiaBapak Alfi Fauzi
Read More
Proses pesanan cepat Packaging aman 🙏 Barangnya original 👍. Terimakasih Syariftama.com