Product Description

Icom IC-F4033T

Features Icom IC-F4033T

IP67 Waterproof and Dust-Tight Protection

The IC-F3033T/S series provides outstanding protection against water and dust equivalent to IP67. The IC-F3033T/S series can withstand 1m depth of water for 30 minutes and its dust-tight construction that prevents the ingress of powder dust, sand, mud and other objects.

Longer Operating Time

TThe supplied waterproof Li-Ion battery pack, BP-232WP (7.4V, 2350mAh (typ.)), provides 17.5 hours* of operating time. The battery has been designed for reliability in extremely cold environments.

*Tx:Rx:Standby=5:5:90. Power save function ON.

Selective Calling, Quiet Stand-by and More

The IC-F3033T/S series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication or selective calling. When a matched 2-Tone/5-Tone is received, the following actions are programmable for each code.

Answer back calls
Beep sounds
Bell icon
Radio stun/kill/revive
Auto TX
Scan

MDC 1200 Compatible

The following selective calling and ANI features are programmable with the built-in MDC signaling.

PTT ID
Emergency (No ACK transmission)
Radio check (RX only)
Stun/Revive (RX only)

Emergency Function

A red button on the top panel can be used as an emergency button and can be used to transmit an emergency signal. Man down (optional UT-124R required) and lone worker functions can also be used for the emergency function trigger.

Scan Features

Priority scan allows you to monitor one or two priority channels while scanning other channels. The mode dependent scan automatically changes the scanning list following the operating channel. The Tx channel and talk back functions allow you to make a quick response while scanning.

Internal Option units Available

The IC-F3033T/S series has an internal socket for a variety of option units including voice scrambler, DTMF decoder or man down unit.

Other Features

Up to 128 memory channel with 8 zones
8-character alphanumeric LCD
8 DTMF autodial memories
Optional HM-168LWP, waterproof speaker-mic
BIIS PTT ID transmission
Low battery alert
2-step power save
PC programmable
Time out timer
Talk around function
Surveillance function

Specifications Icom IC-F4033T

General

			IC-F3033T/S	IC-F4033T/S
Frequency coverage (Varies according to version)			136–174MHz	400–470MHz 450–520MHz
Number of channels			128 channels/8 zones
Channel spacing (Varies according to version)			25/12.5 kHz
Type of emission			16K0F3E/11K0F3E
Current drain	Tx High		1.5A (at 5W)	1.6A (at 4W)
	Rx	Stand-by	75mA
	Rx	Max. audio	250mA	300mA
Dimensions (projections not included; W×H×D)			53×120×37 mm (With BP-232WP)
Weight (approx.)			310g (With BP-232WP)

Transmitter

	IC-F3033T/S	IC-F4033T/S
RF output power (at 7.2V DC)	5W, 2W, 1W (Hi, L2, L1)	4W, 2W, 1W (Hi, L2, L1)
Spurious emissions	80dB typ.	70dB min.
Frequency stability	±2.5ppm
Audio harmonic distortion	3% typ. (AF 1kHz 40% deviation)
FM Hum and Noise (W/N)	46/40dB typ.

Receiver

	IC-F3033T/S	IC-F4033T/S
Sensitivity at 12dB SINAD	0.25μV typ.
Adjacent channel selectivity (W/N)	75/65dB typ.
Spurious response rejection	70dB (min.)
Intermodulation rejection	75dB typ.	74dB typ.
AF output power (at 5% distortion with an 8Ω load)	500mW (typ.)