50W 100% Duty Cycle Operation
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the ICOM IC-FR6200H series provides a reliable 100% duty cycle operation at 50W output.
IDAS, Analog FM and Mixed Mode
The FR6200H series is compatible with both analog FM mode and IDAS conventional and NXDN™ Type-D trunking mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and IDAS conventional modes and to transmit either mode depending on the received signal.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.
D-SUB 25-Pin Accessory Connector
The FR6200H series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.
Multiple CTCSS, DTCS Tone and RAN Code Cecode
The FR6200H series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/ code. This function is useful for sharing a channel with multiple groups.
- CW ID transmission
- ±0.5ppm high frequency stability (Digital mode)
- 2U low profile for 19-inch rack mount
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- Built-in inversion voice scrambler (Analog mode)
- Built-in audio compander (Analog mode)
- PTT priority setting (Local Mic., external PTT or repeater operation)
- 5-Tone and DTMF encoder/decoder (Analog mode)
- Normal and priority scan
- Convenient key assign stickers supplied
- Beat cancel capability
- Low voltage alert (Analog mode)
Specifications Icom IC-FR6200
|Number of channels||Max. 32 channels|
|Type of emission||16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E|
|Antenna impedance||50Ω (Type-N × 2)|
|Operating temperature range||–30˚C to +60˚C; –22˚F to +140˚F|
|Power supply voltage||13.6V DC|
Current drain (at 13.6 V DC)
|Dimensions (W×H×D)||483×88×360 mm ; 19.02×3.46×14.17 in|
|Weight||10kg ; 22lb (approx.)|
|Output power (100% duty cycle)||50W (adjustable to 5W)
50W (at 20–35˚C, 24 hours)
|Max. frequency deviation||±5.0 kHz/±2.5 kHz (wide/narrow)|
|Spurious emissions||80dB typ.|
|FM Hum and noise||
|Audio harmonic distortion||1% typ. (40% deviation)|
|Digital FSK error||5% Max.|
|Microphone impedance||600Ω (8-pin modular)|
|Adjacent channel selectivity||
|Hum and noise ratio||
|Audio output power||4.0W typ. at 5% distortion with a 4Ω load|
|External speaker connector||2-conductor 3.5 (d) mm (1⁄8″)/4Ω|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards.
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Temperature Shock||503.5||I – C|
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Measurements made in accordance with TIA-603-C (for FM) and EN 301 166 (for Digital). All stated specifications are subject to change without notice or obligation.
- DC power cable
- Handle kit
- Key assign stickers
- Mounting rack
- Spare fuse
Produk asli Kami distributor langsung Icom . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.