Product Description

Lutron CMF-3200 Flexible Clamp Meter

Karya Mandiri Techindo has a wide range of Lutron products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Features Lutron CMF-3200 Flexible Clamp Meter

Meet IEC 1010, CAT III 1000 V safety requirement
6000 counts A/D, high resolution
True RMS
Double insulation coil
ACA, DCV, ACV, ohms, continuity. Capacitance, Diode
Smart function, Auto range
Smart operation, Build in 3 intelligent function : ” V “, ” Ω “,” A “
” V ” function can select DCV, ACV automatically with auto range
” Ω ” function can select the Resistance , Diode, Continuity beeper, Capacitance automatically with auto range
” ACA ” 600A ” & ” 3000A ” automatically
Data hold
Auto shut off is available to save battery life
10 M ohm impedance for voltage circuit
Built-in overload protection for most ranges
LSI circuit provides high reliability and durability
Uses durable, long-lasting components, enclosed in strong, light weight ABS-plastic housing

Specifications Lutron CMF-3200 Flexible Clamp Meter

General Specifications
Display	33.5 mm x18.7 mm, LCD display
Measurement	DCV, ACV, ACA, Resistance,Capacitance, Diode, Continuity beeper
Smart function	* ” V ” function can select ACV, DCV automatically with auto range * ” Ω ” function can select the Resistance,Diode, Continuity beeper,Capacitance automatically with auto range * ACA ” 600A “, ” 3000A ” automatically with auto range
Data hold	To freeze the display reading on the LCD display
Power On/Off management	Auto power of or manual power off
Selection	Smart function or auto function
Polarity	Automatic Switching, ” – ” indicates negative polarity
Sampling time	Approx. 0.5 to 1 second
Flexible cable ength	300 mm
Flexible Cable Diameter	8 mm
Dimension	290 x138.3 x 26.5 mm ( 11.4x 5.4 x 1.0 inch )
Weight	197 g/0.435 LB ( w.o battery )
Accessories included	Operation Manual Test Lead Balck & Red
Optional accessory	Soft carrying case

Electrical Specifications (23± 5 )
*AC Current true rms**
Range	600 A/3000 A
Resolution	0.1A /1 A

*AC Current true rms**
Accuracy	600 A Range	± ( 1% +8d ).
	3000 A Range	± ( 1% +10d ).
Linearity	± 0.2% of reading value from 10% to 100% of range value.
Conductor position sensitivity	± 2% of reading value * The measured conductor distance from center＞ 25 mm (1″ ) .
External field influence	Increase ± 1.5% of range value max. * Recommend the distance between different ” Flexibel current probe ” should ＞ 200 mm.
Remark	* Accuracy is specified that the measured conductor’s position is on the center of ” Flexible current probe “. * ACA specification be tested on sine wave 50/60 Hz. * Measurement range︰0.1 A to 3000 A

*DC Voltage*
Range	6 V/60 V/600 V /1000 V
Resolution	0.001V /0.01V /0.1V/1 V
Accuracy	± ( 0.8% + 5d )
Input impedance	10 M ohm.
Over load protection
*AC Voltage true rms**
Range	6 V/60 V/600 V/1000 V
Resolution	0.001 V /0.01 V /0.1 V/1 V
Accuracy	± ( 1% + 8d ) * Spec. are tested under 50/60 Hz.
Input impedance	10 M ohm.
Over load protection	± 1000 DCV, 1000 ACV
Smart function test	It must be > 300 mV AC.
Diode
Short/non conductance, good/defect test
Capacitance
Range	6 nF/60 nF/600 nF/6 uF/60 uF/600 uF
Resolution	0.001nF/0.01nF/0.1 nF/0.001uF/0.01uF/0.1uF
Accuracy	± ( 3 % + 10d )
Over load protection	± 30 DCV, 30 ACV
Remark	* Discharge capacitor before testing. * Smart function must be > 0.4 nF.
OHMS
Range	600 Ω /6 KΩ /60 KΩ /600 KΩ /6 MΩ /60 MΩ
Resolution	0.1 Ω /0.001 KΩ /0.01 KΩ /0.1 KΩ /0.001 MΩ /0.01 MΩ
Accuracy	600 ohm : ± ( 1 % + 5d ) 6K/60K/600K/6M/60M : ± ( 1.5 % + 5d )
Over load protection	± 350 DCV, 350 ACV.
Remark	60MΩ measurements must be operated in the automatic shift mode
Continuity Beeper
Beeper will sound if measured resistance less than 20 ohm.