Product Description
Riken Keiki GX-2012 Portable Gas Monitor
With the GX-2012, you have multiple tools in one instrument. Having 3 operating modes, the GX-2012 can be used for confined space, safety monitoring in it’s Normal Operating mode; for leak investigation in Leak Check mode; and for underground leak checking in Bar Hole mode. When equipped with an optional TC sensor, the GX-2012 can measure 100% volume methane and dynamically auto range from % LEL to % volume. This is ideal for line purge testing.
Application
- Personal monitoring
- Confined space entry
- Refineries / petrochemical
- Chemical plants
- Hazardous material
- Water / wastewater treatment
- Fire services
- Mining
Features Riken Keiki GX-2012 Portable Gas Monitor
- Monitors ppm LEL, % volume methane, O2, CO and H2S
- 0 to 100% volume methane option
- Auto-ranging display of % LEL and % volume
- 3 Operating modes: Normal, leak check, & bar hole
- PPM leak detector
- Adjustable display ranges
- Visual / audible pulses change with gas concentration
- CO display in leak check mode
- Bar hole test mode for underground leak checks
- Internal sample drawing pump with up to 50′
- Vibration, visual, and audible alarms
- Automatic backlight during alarms
- Lithium ion or alkaline battery packs (interchangeable)
- Intrinsically safe, ATEX/IECEx/CE or CSA/CE (Optional)
Specifications Riken Keiki GX-2012 Portable Gas Monitor
Gas Detected | Combustible Gases (Methane as standard) |
% Volume Methane |
Oxygen (O2) | Hydrogen Sulfide (H2S) | Carbon Monoxide (CO) |
Detection Principle | Catalytic combustion | Thermal conductivity | Galvanic cell | Electrochemical cell | |
Detection Range | 0 ~ 100% LEL 0 ~ 500 / 1,000 / 2,000 / 5,000 ppm |
0 ~ 100% Vol. | 0 ~ 40% Vol. | 0 ~ 100 ppm (optional 0-500 ppm) |
0 ~ 500 ppm |
Accuracy Statement (whichever is greater) |
± 5% of reading or ± 2% LEL(LEL mode only) |
± 5% of reading or ± 2% of full scale | ± 0.5% O2 | ± 5% of reading or ± 2 ppm H2S | ± 5% of reading or ± 5 ppm CO |
Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM, includes hydrophobic filter | ||||
Display | Digital LCD with 7 segments, auto backlight during alarm | ||||
Preset Alarms (User Adjustable) |
1st alarm 10% LEL 2nd alarm 50% LEL Over alarm 100% LEL |
No alarms for % Vol. CH4 |
Low alarm 19.5% High alarm 23.5% Over alarm 40.0% | 1st 5 ppm 2nd 30 ppm TWA 10 ppm STEL 15 ppm Over 100 ppm |
1st 25 ppm 2nd 50 ppm TWA 25 ppm STEL 200 ppm Over 500 ppm |
Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
||||
Alarm Methods | Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
||||
Operating Temp. & Humidity | -20°C to +50°C (-4°F to 122°F) 0 to 95% RH, non-condensing |
||||
Response Time | Within 30 seconds (T90) | ||||
Continuous Operation | Alkaline battery: 15 hours Li-Ion battery: 10 hours 70°F (21°C) |
||||
Power Source | Li-Ion battery pack, or 3 “AA” Alkaline battery pack; interchangeable | ||||
Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe. Class I, Division 1, Groups A, B, C, D (optional version available) | ||||
Dimension & Weight | Approx. 143 (H) x 71 (W) x 43 (D) mm (5.6” H x 2.8” W x 1.6” D), approx. 350 g (12.3 ounces) | ||||
Case Material | High dust & water resistant design. RFI shielded high impact plastic with protective rubber overmolding | ||||
Controls | Five buttons: POWER / ENTER, DISPLAY, AIR, RESET, SHIFT | ||||
Standard Accessories |
|
||||
Optional Accessories |
|
||||
Configurations | 1, 2, 3, 4, or 5 sensor units Li-Ion or alkaline battery pack options |
Riken Keiki GX-2012 – Datasheet
Produk asli Kami distributor langsung Riken Keiki . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.