Description
Karya Mandiri Techindo has a wide range of Apera products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
Apera Plastic pH ATC probe 201T‐F
Brief Introduction
Apera Instruments 201T-F pH/Temp. Electrode is featured with a proprietary lithium glass membrane for
fast and stable readings and a built-in temperature sensor for automatic temperature compensation. The
gel inner reference solution does not need to be refilled. This electrode is designed for testing in general
water solutions. The electrode may not work well in the following situations:
1. Long-term testing in high temperature solutions (>122°F or 50°C)
2. Frequent testing in strong alkaline (>12 pH) or acid (<2 pH) solutions
3. Testing low ionic strength solutions like distilled or deionized water
4. Testing caustic solutions that will corrode the polycarbonate housing of the electrode
How to Install the Electrode
1.Find the BNC socket (where it shows pH ORP) on the pH meter; Open the rubber cap; Insert the
blue BNC connector of the electrode to the BNC socket while twisting clockwise until it’s locked.
2. Find the RCA socket (where it shows temp.) on the pH meter; Open the rubber cap; Insert the black
RCA connector of the electrode to the RCA socket directly.
3. After installing the new electrode to your meter, a 3-point calibration must be performed to ensure
the accuracy.
How to Use the Electrode
1.There is a proper amount of storage solution in the cap on top of the electrode. The pH glass
sensor tip is soaked in it to keep its sensitivity.
2. Before measuring, loosen the bottle cap, then pull out the electrode while twisting
counterclockwise. Place the storage bottle at a safe position.
3. Rinse the electrode with purified water and shake off excess water or blot-dry it with clean tissue
or filter paper. Never rub the glass membrane.
4. Insert the electrode into your sample solution and stir it for a few seconds in the solution to
remove potential air bubbles, which may cause unstable readings. Then wait for the stable
reading and take the measurement.
5. After use, insert the electrode while twisting clockwise into the storage bottle, then tighten the
bottle cap. If the KCL storage solution (SKU: AI1107) in the cap is contaminated, please fill in new
storage solution (other brands’ storage solution may not work with this electrode).
Technical Specifications
- Range 0 to 14 pH; 32 to 176°F (0 – 80°C)
- Housing Polycarbonate
- Junction Single fiber ceramic
- Reference electrode Ag/AgCl
- Reference solution Gel KCL
- Connector BNC/RCA
- Cable length 3 Ft
- Dimension ø12*160 mm
- Temperature sensor 30KΩ thermistor
- Operating
- temperature
- 32 to 176°F (0 – 80°C)
Apera Plastic pH ATC probe 201T‐F – Datasheet
KARYA MANDIRI TECHINDO merupakan supplier peralatan ukur dan uji terlengkap di Indonesia. Kami menyediakan berbagai alat Radio Komunikasi, Telpon Satelit, Surveying Instruments, Survey Tools, Binocular, Alat Ukur & Uji, Alat Analisa Air & Food dan Sirine.
KARYA MANDIRI TECHINDO adalah Supplier Apera Plastic pH ATC probe 201T‐F di Jawa Barat & Jakarta dan juga menjual Brand Apera dll. lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami melalui Whatsapp 0821-3010-0456. atau melalui email [email protected].
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.






