Dial Test Indicator 0-0.8mm with Magnetic Stand

Description

Dial Test Indicator 0-0.8mm with Magnetic Stand

Karya Mandiri Techindo has a wide range of Dial Indicator products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Is a tool to measure the smoothness or flatness of the surface. With an accuracy of 0.01 mm and a measuring range of 0-0.8mm.

Dial Test Indicator 0-0.8mm with Magnetic Stand Ideal for

• Measures the flatness of a flat surface
• Measures the surface flatness and roundness of a shaft
• Measure the flatness of the cylinder wall surface

How to read: one line is 0.01 mm
If the Needle is on the 7th line, it means 0.01 x 7 = 0.07 mm

Dial Indicators are usually attached to a holder/stand/Magnetic base which functions as a holder and regulates the position of the Dial Indicator (height, low, inclination etc.) on the place or surface of the object being measured.

Features about Adjustable Magnetic Metal Base

• Permanent magnetic operation with open / off control
• The flat base is safely installed on the cylindrical surface
• Ideal holding lever indicators in any direction of machine tool alignment operation
• Flexible, powerful and precise rotary joint, it can adjust any direction and position
• A powerful magnetic base with a switch magnet
• Good stability,it is an ideal tool for field measurement of precision workpieces
• A magnetic base can be used for dial indicator, dial test indicator etc

Features Dial Test Indicator 0-0.8mm with Magnetic Stand

• Accurate and convenient measurement of narrow or concave objects, and dial gauge is difficult to measure the size of internal and external diameter.
• Using non-clutch structure to achieve automatic rotation of the measurement direction.
• Dovetail mount for mounting the indicator from the top, rear, or front.
• Durable, accurate measurement, with high sensitivity and rapid response capability.
• 0-0.8mm measuring range, 0.0005 “/0.01mm scale, 0-40-0 balance inches.
• This dial test indicator is designed for measurement during machining, layout and inspection work. The dial has a fine black scale of 0-40-0 balanced inches reading and a red scale of 0.001mm balanced measurement reading.
• Magnetic pointer and stylus can be used reliably in a magnetic environment.
• The probe can be 180° rotation, free to adjust the measurement direction, left and right swing-type probe.
• The knurled bezel rotates 360 degrees, making the reading zero at any position.

Specifications Dial Test Indicator 0-0.8mm with Magnetic Stand

Package included:

• 1 x Fowler yellow-face dial test indicator
• 1 x 3/8″ Dovetail clamp
• 1 x 5/32″ Dovetail clamp
• 1 x Molded case