Kyoritsu Model 8031 Phase Indicators
Kyoritsu Model 8031 Phase Indicators
- Operating voltage 110 – 600V AC
- Time limit for continuous >500V: within 5 minutes
- Frequency response 50/60Hz
- Digital Phase Indicator with open phase checker
- The phase indicator is designed to check the presence of an open phase and also the phase sequence by rotating the disk and lamp
Kyoritsu KEW 4105A Earth Testers
Kyoritsu KEW 4105A Earth Testers
- In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
(unit can be hung from the neck for simplified measurement) - The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
- Dust and drip proof. (designed to IEC 60529 IP54)
- Earth resistance value can be read directly from the scale.
- Designed to meet IEC 61010-1 safety standard.
- Capable of measuring earth voltage.
- Small and lightweight. Shock resistant new case material.
- 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
Kyoritsu Model 4118A LOOP/PFC/PSC Testers
Kyoritsu Model 4118A LOOP/PFC/PSC Testers
- Custom microprocessor controlled for highest accuracy and reliability.
- 3 LEDs for checking correct wiring status.
- 15mA LOOP measurement:
LOOP impedance 2000Ω range measurement is carried out with low test current (15mA).
The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA). - Direct reading of Prospective Short Circuit Current (PSC).
- Safe voltage measurement function.
- Large custom digital display readout on all models.
Kyoritsu Model 4200 Earth Clamp Tester
Kyoritsu Model 4200 Earth Clamp Tester
- Sample rate estimates. 1 time per second
- Estimated current consumption. 50mA (max.100mA)
- Auto power off Turns the power off approximately 10 minutes after the last button operation
- Conductor size Approx. Ø32mm
- Store and display up to 100 measurement data
- Data hold function / Buzzer function / Backlight function
- The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes
Kyoritsu KEW 4202 Earth Clamp Tester
Kyoritsu KEW 4202 Earth Clamp Tester
- The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems
- True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
- Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments
- Auto power-off Turns power off about 10 minutes after the last button operation
Kyoritsu KEW 4106 Earth Resistance & Resistivity Tester
Kyoritsu KEW 4106 Earth Resistance & Resistivity Tester
- High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range
- Warning for excessive noise and high Auxiliary Earth Spikes resistance
- Large Graphic Display with backlight for readings in poorly illuminated areas
- Up to 800 measurement results can be saved in the memory and recalled on the display
- Robust design with IP54 protection
Kyoritsu KEW 4300 Simplified Earth Tester
Kyoritsu KEW 4300 Simplified Earth Tester
KEW 4300 is simplified earth resistance tester (based on 2-pole method) that can be used for various distribution lines and electrical appliances and it also can measure AC/DC voltage. (As for AC Voltages, true rms values can be obtained.)
- 200/2000Ω (2 ranges): auto-ranging
- Warning buzzer triggered at 100Ω or less
- LED lights up when a large earth voltage is detected
Kyoritsu KEW 4105DL Earth Tester
Kyoritsu KEW 4105DL Earth Tester
- 3pole and 2pole Earth Resistance measurement (0.01Ω-2000Ω)
- Waterproof design (IP67)
- Rotary Switch makes the user interface very intuitive
- Large LCD Display with Backlight
- Led to monitor correct / non correct auxiliary earth spike resistance
- Earth Voltage Measurement (AC/DC 0-300V)
- CAT Ⅳ 100V
Kyoritsu MODEL 4102A Earth Tester
Kyoritsu MODEL 4102A Earth Tester
- The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes
- Dust and drip proof. (designed to IEC 529 IP54)
- Earth resistance value can be read directly from the scale
- Designed to meet IEC 61010-1 safety standard
- Capable of measuring earth voltage
- Small and lightweight. Shock resistant new case material
Kyoritsu KEW 3128 High Voltage Insulation Tester
Kyoritsu KEW 3128 High Voltage Insulation Tester
- Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions
- 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000V
- Can be operated from built-in rechargeable battery or from AC line
- Automatic discharge after test with monitoring of the discharge voltage
- Internal memory can store about 43,000 data (max)
- Robust design for field use with IP64 rating (with lid closed)
