Extech 42570 Dual Laser InfraRed Thermometer
Extech 42570 Dual Laser InfraRed Thermometer
This Dual Laser Infrared Thermometer identifies the IR temperature where the dual laser converges into a single spot at approximately 50 inches from the target. Meter features fast 100 millisecond response times, Type K input, and a USB interface. Adjustable emissivity increases measurement accuracy for a variety of surfaces. Adjustable high/low set points with audible alarm alerts you when the temperature exceeds programmed set points. Featuring MAX/MIN/AVG/DIF measurements that displays the highest, lowest, average, and MAX minus MIN values. Comes complete with Type K temperature probe, USB cable and software, carrying case and 9-volt battery.
Extech MN35 Digital Mini MultiMeter
Extech MN35 Digital Mini MultiMeter
The MN35 is a convenient mini size multimeter with protective rubber holster and tilt stand. Manual ranging, measures AC and DC Voltage to 600V, Resistance with Continuity and Diode functions, DC Current to 10A, Temperature, and 9V/1.5V Battery test. Includes protective rubber holster, 9V battery, test leads and Type K thermocouple probe.
Extech PRC30 Multifunction Process Calibrator
Extech PRC30 Multifunction Process Calibrator
The PRC30 is a Multifunction Process Calibrator. This calibrator provides precision sourcing and measurements for thermocouples (eight types), current (mA), and voltage (mV and V) devices. Featuring 24 volt loop power, five user adjustable calibration presets, and temperature output in Fahrenheit, Celsius, and millivolts. Product includes test leads, alligator clips, thermocouple calibration cable, universal calibration cable, 100-240V AC universal adapter with 4 plugs, AA batteries, hard case, and user manual.
Extech SDL400 Light Meter/Datalogger
Extech SDL400 Light Meter/Datalogger
The SDL400 records data on an SD card in Excel format. Wide range to 10,000Fc or 100kLux. Cosine and color-corrected measurements. Utilizes precision silicon photo diode and spectral response filter. Offset adjustment used for zero function to make relative measurements. Adjustable data sampling rate. Stores 99 readings manually and 20M readings via 2G SD card. Type K/J Thermocouple input for high temperature measurements. Large backlit LCD display. Record/Recall Min, Max, Data Hold and Auto power off. Complete with 6 x AA batteries, SD card, hard carrying case and light sensor with protective cover.
Extech SDL500 Hygro-Thermometer/Datalogger
Extech SDL500 Hygro-Thermometer/Datalogger
The SDL500 records data on an SD card in Excel format. Relative Humidity, Temperature, Dew Point, and Wet Bulb measurements. Adjustable data sampling rate. Stores 99 readings manually and 20M readings via 2G SD card. Type K/J Thermocouple input for high temperature measurements. Large backlit dual LCD display. Record/Recall Min, Max, Data Hold and Auto power off functions. Complete with 6 x AA batteries, SD card, carrying case and Humidity/Temperature probe.
Extech TM500 12-Channel Datalogging Thermometer
Extech TM500 12-Channel Datalogging Thermometer
The TM500 is a 12-Channel Datalogging Thermometer. This Datalogging Thermometer features 6 Thermocouple Types (J, K, E, T, R, S). Displays CH1 to CH8 or CH9 to CH12 on screen, data can be recorded from all 12 channels simultaneously onto an SD card in Excel format for further analysis. Complete with 8 AA batteries, 12 general purpose Type K bead wire temperature probes, SD card, and hard carrying case.
Siglent SDM3055 / SDM3055-SC 5 ½ Digital Multimeters
Siglent SDM3055 / SDM3055-SC 5 ½ Digital Multimeters
- Real 5½ digits readings resolution ( 240, 000 counts )
- Up to 150 rdgs/s measurement speed
- True-RMS AC Voltage and AC Current measuring
- 1 Gb Nand flash size, Mass storage configuration files and data files
- Built-in cold terminal compensation for thermocouple temperature measurements
- With easy, convenient and flexible PC software: EasyDMM
- standard interfaces: USB Host, LAN ( Optional Accessories USB-GPIB Adapter )
- Scanner Card SC1016 ( Only for SDM3055-SC )
- Support remote control operation via SCPI commands.Compatible with commands of main stream multimeters.
AMTAST AMT206 Thermometer
AMTAST AMT206 Thermometer
- Equipped with a Zone Display which can show food under the hazardous area (4 – 60°C / 40 – 140°F) or the safe zone
- A temperature measuring device that has a 2 in 1 design with the addition of a Folding + Infrared Thermocouple Probe
- Has a protection function with an IP65 standard, so that it can make it easier for users to take measurements in the field
- There is a Bright White LED as a pointer, so it will be very helpful in its use
Amprobe ACDC-54NAV 1000 A AC/DC Navigator Clamp Meter
Amprobe ACDC-54NAV 1000 A AC/DC Navigator Clamp Meter
The ACDC-54NAV clamp power meter offers measurement of AC/DC current up to 1000 A, AC/DC voltage up to 1000 V, temperature capability, and wide jaws to handle large conductors up to 1.6″ (40 mm) for high voltage industrial environments.
- Measures temperature from -58 °F to 1832 °F (-50 °C to 1000 °C)
- Includes inrush current measurement and phase rotation indication for 3-phase motors
- Non-contact voltage detection enhances safety
- Large backlit digital display with analog bar graph presents the full picture
- Auto power off conserves battery life
Amprobe IR-720 Infrared Thermometer
Amprobe IR-720 Infrared Thermometer
The Amprobe IR-720, a 20:1 spot to distance ratio infrared thermometer, offers best in class accuracy and response time with a temperature measurement range of -26 °F to 1922 °F (-32 °C to 1050 °C). The IR-720 is specifically designed for HVAC/R, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.
- 20:1 Distance to Spot Ratio
- Temp Range of -26 °F to 1922 °F
- Precision accuracy and rapid response time
- Laser pointer, backlit dual LCD Display
- Auto display hold and MAX/MIN memory
