Dial Test Indicator 0-0.8mm with Magnetic Stand
Is a tool to measure the smoothness or flatness of the surface. With an accuracy of 0.01 mm and a measuring range of 0-0.8mm.
Dial Test Indicator 0-0.8mm with Magnetic Stand Ideal for
- Measures the flatness of a flat surface
- Measures the surface flatness and roundness of a shaft
- Measure the flatness of the cylinder wall surface
How to read: one line is 0.01 mm
If the Needle is on the 7th line, it means 0.01 x 7 = 0.07 mm
Dial Indicators are usually attached to a holder/stand/Magnetic base which functions as a holder and regulates the position of the Dial Indicator (height, low, inclination etc.) on the place or surface of the object being measured.
Features about Adjustable Magnetic Metal Base
- Permanent magnetic operation with open / off control
- The flat base is safely installed on the cylindrical surface
- Ideal holding lever indicators in any direction of machine tool alignment operation
- Flexible, powerful and precise rotary joint, it can adjust any direction and position
- A powerful magnetic base with a switch magnet
- Good stability,it is an ideal tool for field measurement of precision workpieces
- A magnetic base can be used for dial indicator, dial test indicator etc
Features Dial Test Indicator 0-0.8mm with Magnetic Stand
- Accurate and convenient measurement of narrow or concave objects, and dial gauge is difficult to measure the size of internal and external diameter.
- Using non-clutch structure to achieve automatic rotation of the measurement direction.
- Dovetail mount for mounting the indicator from the top, rear, or front.
- Durable, accurate measurement, with high sensitivity and rapid response capability.
- 0-0.8mm measuring range, 0.0005 “/0.01mm scale, 0-40-0 balance inches.
- This dial test indicator is designed for measurement during machining, layout and inspection work. The dial has a fine black scale of 0-40-0 balanced inches reading and a red scale of 0.001mm balanced measurement reading.
- Magnetic pointer and stylus can be used reliably in a magnetic environment.
- The probe can be 180° rotation, free to adjust the measurement direction, left and right swing-type probe.
- The knurled bezel rotates 360 degrees, making the reading zero at any position.
Specifications Dial Test Indicator 0-0.8mm with Magnetic Stand
about 8 cm/3.15″
about 3 cm/1.18″
|Contact point length
|About 1.5 cm
About 10*6*3.5 cm
|Dial type and reading
0-40-0 balanced inch and 0-25-0 balanced metric readings
- 1 x Fowler yellow-face dial test indicator
- 1 x 3/8″ Dovetail clamp
- 1 x 5/32″ Dovetail clamp
- 1 x Molded case
Produk asli Kami distributor langsung Dial Test Indicator . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.