FeelTech FY6600-30M Digital Signal Generator

Category Brand
FeelTech FY6600-30M Digital Signal Generator

FY6600 series dual-channel function/arbitrary waveform generator adalah satu set generator sinyal fungsi, generator gelombang arbitrer, generator sinyal pulsa, penyapu frekuensi, penghitung dan pengukur frekuensi dalam satu fungsi, kinerja tinggi, hemat biaya, generator sinyal multi-fungsi.

Description

FeelTech FY6600-30M Digital Signal Generator DDS Dual-channel 250MSa/s 30MHz

Karya Mandiri Techindo has a wide range of FeelTech products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

FY6600 series dual-channel function/arbitrary waveform generator is a set of function signal generator, arbitrary waveform generator, pulse signal generator, frequency sweeper, counter and frequency meter in one function, high performance, cost-effective, multi-function Signal generator. Rich shortcut keys greatly simplify the complex operation process and greatly enhance the operability of the instrument.

Users do not have to spend a lot of time to learn and become familiar with the operation of the instrument, and they can use it proficiently. Particularly suitable for electronic enthusiasts, scientific research institutions and high-tech enterprises.

Features FeelTech FY6600-30M Digital Signal Generator

  • The FY6600 uses a professional 14Bit high-speed D/A chip instead of a 12-bit D/A resistor network built with several inexpensive resistors. The higher the resolution, the smoother the waveform details.
  • The FY6600 series sampling rate is upgraded to 250MSa/s, and the waveform contour of the instrument is much clearer than the 200MSa/s sampling rate at the same frequency;
  • FY6600 series waveform memory depth upgrade to 8192 * 14bits, high-precision signal details can be restored. The waveform length is 4 times that of your partner.
  • the industry’s original very practical VCO function, see the feature introduction.
  • FY6600 series phase resolution up to 0.1 degrees, users can more accurately control the delay of the two signals;
  • the signal output terminal using pure copper material, not plastic coated zinc alloy material, the details are attitude;
  • the instrument uses imported long-life keys, feel comfortable;
  • The first two-channel waveforms are displayed on the LCD interface at the same time. (The non-allegative users mimic our 2015 version and only indicate one waveform)
  • 4 TTL output makes the application of the instrument more extensive;
  • small signal is particularly good, FY6600 can output 1mVPP small signal amplitude resolution of 1mV, and can be done 1mVpp, 10mVpp, 100mVpp, 1Vpp and other different step values, the maximum amplitude range 1mVpp~20Vpp stepless adjustment.
  • the frequency range is wider, the maximum frequency range of sine wave is 1uHz~60MHz, the maximum range of square wave is 1uHz~25MHz, other wave frequency range is 1uHz~20MHz, the full range of frequency resolution is 1uHz, the whole range of frequency is not divided, direct digital setting ;
  • The rising edge time within the square wave 5V is as low as 7nS, and the maximum output frequency can reach 25MHz;

Specifications FeelTech FY6600-30M Digital Signal Generator

Frequency
ModelFY6800-20M   FY6800-30MFY6800-50MFY6800-60M
Sine0~20MHz0~30MHz0~50MHz0~60MHz
Square0~15MHz0~25MHz0~25MHz0~25MHz
Ramp, Triangle0~10MHz0~10MHz0~10MHz0~10MHz
Pulse0~10MHz0~10MHz0~10MHz0~10MHz
TTL/CMOS0~10MHz0~20MHz0~20MHz0~20MHz
Arbitrary Waveform0~10MHz0~10MHz0~10MHz0~10MHz
Minimum pulse width20ns(All models of pulse wave minimum width can   reach 20ns)
Min. Resolution   on all frequency range1μHz (Min.   resolution can reach 1μHz on all frequency range to ensure adjusting accuracy   under high frequency. For example, it can output 10.000000000001MHz signal).
Accuracy±20ppm
Stability±1ppm/ 3hours
Waveform Characteristics
WaveformsSine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time   can be set accurately), Triangle/Ramp, Sawtooth   Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step,   Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone,   Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise,   AM, FM, and other 64 sets customer-defined waveform.
Non-Volatile   StorageCan store 64   user-defined arbitrary waveforms, (8K 14bits) * 64
Waveform Length8192 points * 14bits
Sampling Rate250MSa/s
Vertical Resolution14 bits
SineHarmonic   Suppression≥50dBc(<1MHz);   ≥45dBc(1MHz~20MHz);
Total Harmonic Distortion<0.5%   (20Hz~20kHz,0dBm)
SquareRise/Fall Time≤7ns (VPP<5V)
Overshoot≤5%
Duty Cycle0.01%~99.99%   (Resolution 0.01%)
Sawtooth waveLinearity>99%   (0.01Hz~10kHz)
Output Characteristics
Amplitude(VPP)Frequency≤10MHz:   1mVpp~20Vpp;

10MHz<Frequency≤20MHz:   1mVpp~10Vpp;

Frequency>20MHz:   1mVpp~5Vpp;

Resolution1mV
Amplitude Stability±0.5%/   5 Hours
Amplitude flatness±2.5%(<10MHz);±5%(>10MHz);
Waveform Output
Impedance50Ω±10%(Typical)
ProtectionAll channels can work more than 60 seconds   when the load is short-circuited.
DC Offset
Offset    RangeFrequency≤20MHz:   ±10V;  Frequency>20MHz: ±2.5V;
Offset Resolution1mV
Phase Feature
Phase   range0~359.99°
Phase resolution0.01°
TTL Output
TTL Level   Amplitude>3Vpp
Fan-out>8 TTL LOAD
Rise/Fall Time≤10ns
CMOS Output
Low Electric Level<0.3V
High Electric Level1V~10V
Rise/Fall Time≤18ns
External Measurement
FunctionFrequency, Period, Positive/Negative Pulse Width, Duty Cycle
Input   Voltage Range1Vpp~20Vpp
Frequency   MeterResolution0.01Hz (Gate Time = 100S)
Range0.01Hz~100MHz
SensitivityGate Time 3   grades (1S, 10S, 100S) adjustable
CounterRange0-4294967295
CouplingDC, AC
Working ModeManual
PeriodMeasurement   Range5ns ~ 20sDC coupling   measurement
Pulse WidthMeasurement   Range0ns ~ 20s
Resolution5ns
Duty CycleRange (Display)0% ~ 100%
Sweep
Carrier   WaveformSine,   Square, Ramp, Arbitrary (except DC)
Sweep TypeLinear or   Logarithm
Sweep DirectionUp, Down and roundtrip sweep directions;
Sweep   ObjectsFrequency,   Amplitude, Offset, Duty Cycle
Sweep Time0.01S~999.99S/Step
Setting rangeStarting   position and Finishing position can be set arbitrarily.
Sweep RangeDecided by Parameters setting.
VCO   (Voltage   Control Output)
Modulation signal range to input0~5V
VCO signal frequency range0-1000Hz
VCO control objectvoltage controlling frequency (VCF), voltage controlling amplitude   (VCA), voltage controlling offset, voltage controlling duty cycle.
VCO special functionCan Amplitude Modulate (AM) or Frequency Modulate (FM) by external analog   signal.
Modulation
Modulation TypeAM, FM, PM, ASK, FSK, PSK
Carrier WaveformSine, Square, Triangle, Ramp, Arbitrary waveform (Except DC)
AM
SourceInternal (CH2) / External (VCO IN Port)
Modulating WaveformSine, Square, Triangle, Ramp, Arbitrary waveform
Depth0% to 100%
Modulating FrequencyInternal : 1μHz~1MHz;  External:   1μHz~2KHz;
FM
SourceInternal (CH2) / External (VCO IN Port)
Modulating WaveformSine, Square, Triangle, Ramp, Arbitrary waveform
Modulating FrequencyInternal : 1μHz~1MHz;  External:   1μHz~2KHz;
PM
SourceInternal (CH2) / External (VCO IN Port)
Modulating WaveformSine, Square, Triangle, Ramp, Arbitrary waveform
Phase Deviation0° to 360°
Modulating FrequencyInternal : 1μHz~1MHz;  External:   1μHz~2KHz;
ASK
SourceInternal (CH2), External (ASK IN Port), Manual
Modulating WaveformSquare with 50% duty cycle.
Key Frequency1μHz~10MHz
FSK
SourceInternal (CH2), External (FSK IN Port), Manual
Modulating WaveformSquare with 50% duty cycle.
Key Frequency1μHz~10MHz
PSK
SourceInternal (CH2), External (PSK IN Port), Manual
Modulating WaveformSquare with 50% duty cycle.
Key Frequency1μHz~10MHz
Burst Function
Carrier WaveformSine,   Square, Ramp, Arbitrary (except DC)
Burst Count1~1048575
Trigger SourceManual, Internal, External (AC/DC)
General Specifications
DisplayType2.4 inch, TFT Color Display
Save & LoadAmount20
Position01 to 20 (01 for start default value)
InterfaceTypeUSB to Serial interface
ProtocolCommand line mode, providing communication   protocols.
Communicating Speed115200bps (Industrial standard)
PowerVoltage RangeAC100V~240V
TechnicSMD, LSI, Reliable and durable
BuzzerCan be turned on/off by setting.
OperationButtons and knob   continuously.
EnvironmentTemp.: 0~40℃, Humidity: ﹤80%
Size200mm * 190mm *   90mm (L * W * H)
Weight900g
Package   Size25cm * 21cm *   10cm (L * W * H)
Package Weight1kg(Main engine,   accessories and packing materials)

 

 

 

FeelTech FY6600-30M – Manual

KARYA MANDIRI TECHINDO adalah Supplier FeelTech FY6600-30M Digital Signal Generator dan juga menjual Brand Feeltech. Lihat produk kami lainnya di sini JSISGISMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email karyamandiritechindo@gmail.com.


 

Additional information

Brand

Feeltech

Model

FY6600-30M

Made In

China

TESTIMONI PELANGGAN

alhamdulillah pesanan sudah sampai di Bengkulu.Pengalaman order di karyamandiritechindo.com Respon cepat. Pengiriman Cepat dan Free, Aman & Terpercaya.

Ibu Natalia Dan Ria
PT. AGricinal

Terimakasih karyamandiritechindo.com, orderannya sudah sampai dengan selamat Kurir Syariftama Express sangat ramah

PT. Bumi Bangun Perkasa
Ibu Rizeki

Order yg kedua, seperti biasa produk sangat memuaskan dan pelayannya ramah, Terimakasih Pak Aji Amanda Semoga di orderan berikutnya tetap TOP

PT. Daruna

Puas banget belanja di karyamandiritechindo.com. pengiriman cepat kualitas produk mantap.

PT. Niaga Andalan Serayat

BUAT PERMINTAAN HARGA