Product Description

Lutron PC-6010 Power Clamp Meter

Lutron PC-6010 Power Ampere Pliers, designed to ensure load current, AC voltage and continuity. It is suitable for current measurement up to 400 A. The Lutron PC6010 also has a higher resolution for loads below 40 A.

Features Lutron PC-6010 Power Clamp Meter

Watt ( true power ), ACV, DCV, ACA, OHMS, Diode.
Watt measurement via the inductive clamp jaw.
Wide range for power measurement, max. value up to 100 KW.
Design meet IEC 1010 safety requirement.
Heavy duty ACA clamp meter, 600 A max. range.
Compact & heavy duty ABS housing plastic case.
Measure AC current by the inductive conductor.
LSI circuit provides high reliability and durability.
LCD display, clear readout
Overload protection circuit is provided for all range.

Specifications Lutron PC-6010 Power Clamp Meter

General Specifications

Display	13 mm (0.5″) LCD, 3 1/2 digits. Max. indication 1999.
Measurement	Watt (true power). DCV, ACV, ACA, ohms, Diode.
Polarity	Automatic Switching, ” – ” indicates negative polarity.
Current Sensor	Hall effect sensors.
Over-input	Display shows ” 1 ” or ” -1 “.
Watt Zero Adjustment	Built-in external adjustment knob.
Sampling Time	Approx. 0.4 second.
Battery	Heavy duty type or Alkaline battery. DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent.
Weight	480 g/0.88 LB (including battery).
Dimension	HWD 230 x 74 x 38 mm. (9.1 x 2.9 x 1.5 inch)
Conductor Size	73.5 mm ( 2.9 inch ) – out side.
Accessories Included	Operation manual………….. 1 PC. Test lead (red & black)…… 1 pair.
Optional Accessories	Carrying case CA05A

Electrical Specifications ( 23 ± 5 )
Function	Range	Resolution	Accuracy	Overload Protection
AC Watt (true power) * ref. remark	20 KW	0.01 KW	± ( 3% + 8d )	Volt input : AC 600V Current input : AC 500A
AC Watt (true power) * ref. remark	100 KW	0.1 KW	± ( 3% + 5d )	Volt input : AC 600V Current input : AC 500A
DC voltage	200 V	0.1 V	± (0.8 % + 1 d )	DC 600 V.
AC voltage	600 V	1 V	± (1% + 2 d)	AC 600 V
OHMS	2 k ohm	1 ohm	± (1 % + 1 d)	AC/DC 250 V
AC current	200 A	0.1 A	± (2% + 10 d)	1000 ACA (within 1 min.)
AC current	600 A	1 A	± (2% + 5 d)	1000 ACA (within 1 min.)
Diode	Short/non conductance, good/defect test
Continuity Beeper	A continuity testing beeper is equipped, so when checking circuits of shorts or opens, then it is not necessary to look at the meter. The Beeper sounds will be generated if continuity is present.