Product Description
Trimble R12 GNSS Systems
Karya Mandiri Techindo has a wide range of Trimble products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
The Trimble® R12 GNSS receiver is engineered for improved performance in challenging GNSS conditions. With groundbreaking signal management and rugged durability, get ready to go further than you ever thought possible.
Features Trimble R12 GNSS Systems
- Next generation Trimble® ProPoint™ GNSS positioning engine. Engineered for improved accuracy and productivity in challenging GNSS conditions.
- 672-channel solution with Trimble 360 satellite tracking technology Trimble SurePoint™ tilt compensation and precise position capture
- Trimble xFill® correction outage technology
- Support for RTK level precision Trimble CenterPoint® RTX corrections technology
- Optimized for Trimble Access™ field software
- Android™ and iOS platform support
- Cellular, Bluetooth®, Wi-Fi data connectivity
- Military-spec rugged design and IP-67 rating
- Ergonomic form factor
- All day battery with built-in status indicator
- 6 GB internal memory
Specifications Trimble R12 GNSS Systems
Performance Specifications
GNSS Measurements:
- Constellation agnostic, flexible signal tracking and improved positioning1 in challenging environments with Trimble ProPoint
- GNSS technology
- Increased measurement productivity and traceability with Trimble SurePoint eBubble tilt compensation
- Advanced Trimble Custom Survey GNSS chips with 672 channels
- Reduced downtime due to loss of radio signal or cellular connectivity with Trimble xFill technology
- Signals tracked simultaneously:
* GPS: L1C, L1C/A, L2C, L2E, L5
* GLONASS: L1C/A, L1P, L2C/A, L2P, L3
* SBAS (WAAS, EGNOS, GAGAN, MSAS): L1C/A, L5
* Galileo: E1, E5A, E5B, E5 AltBOC, E62
* BeiDou: B1, B1C, B2, B2A, B3
* QZSS: L1C/A, L1S, L1C, L2C, L5, L6
* NavIC (IRNSS): L5
* L-band: CenterPoint RTX - Iridium filtering above 1616 MHz allows antenna to be used up to 20 m away from iridium transmitter
- Japanese LTE filtering below 1510 MHz allows antenna to be used up to 100 m away from Japanese LTE cell tower
- Digital Signal Processor (DSP) techniques to detect and recover from spoofed GNSS signals
- Advanced Receiver Autonomous Integrity Monitoring (RAIM) algorithm to detect and reject problem satellite measurements to improve position quality
- Improved protection from erroneous ephemeris data
- Positioning Rates: 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Positioning Performance
Code Differential GNSS Positioning
- Horizontal: 0.25 m + 1 ppm RMS
- Vertical: 0.50 m + 1 ppm RMS
- SBAS: typically <5 m 3DRMS
Static GNSS Surveying
- High-Precision Static
* Horizontal: 3 mm + 0.1 ppm RMS
* Vertical: 3.5 mm + 0.4 ppm RMS - Static and Fast Static
* Horizontal: 3 mm + 0.5 ppm RMS
* Vertical: 5 mm + 0.5 ppm RMS
Real Time Kinematic Surveying
- Single Baseline <30 km
* Horizontal: 8 mm + 1 ppm RMS
* Vertical: 15 mm + 1 ppm RMS - Network RTK5
* Horizontal: 8 mm + 0.5 ppm RMS
* Vertical: 15 mm + 0.5 ppm RMS - RTK start-up time for specified precisions6: 2 to 8 seconds
Trimble RTX™ Technology (Satellite And Cellular/Internet (IP))
- CenterPoint RTX
* Horizonta: 2 cm RMS
* Vertical: 5 cm RMS
* RTX convergence time for specified precisions – Worldwide: < 15 min
* RTX QuickStart convergence time for specified precisions: < 1 min
* RTX convergence time for specified precisions in select regions (Trimble RTX Fast Regions): < 1 min
Trimble XFILL
- Horizontal: RTK + 10 mm/minute RMS
- Vertical: RTK + 20 mm/minute RMS
Including |
Unit |
| Main unit Trimble R12 LT
Internal Battery Dual Charger for Internal Battery UHF Antenna, USB Field Data Cable USB Office Data & Power Cable Quick Release Adapter Hardcase Extension Pole with Lever Tape Measure, Tribrach Adaptor Tripod TDC600 with Trimble Access GNSS Pole Bracket GPS Pole Bipod |
1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 |
Perawatan :
Selain dikalibrasi rutin ada baiknya untuk perawatan hariannya, setelah theodolite digunakan dilap dari kotoran atau debu yang menemepel menggunakan kain bersih atau majun dengan sedikit minyak kayu putih.
Manfaat Kalibrasi :
- Menjaga kondisi instrumen ukur dan bahan ukur agar tetap sesuai dengan spesefikasinya
- Untuk mendukung sistem mutu yang diterapkan di berbagai industri pada peralatan laboratorium dan produksi yang dimiliki.
- Bisa mengetahui perbedaan (penyimpangan) antara harga benar dengan harga yang ditunjukkan oleh alat ukur.
- Kalibrasi Sebaiknya Dilakukan Secara Rutin & Berkala, Baiknya Alat Itu Dikalibrasi Per 6 Bulan Sekali Atau Waktu Pemakaian Alat Sudah Mencapai 1.000 jam.
Trimble R12 – Datasheet
KARYA MANDIRI TECHINDO adalah Supplier Trimble R12 GNSS Systems dan juga menjual Brand Trimble. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].
