Extech DO600 Waterproof ExStik® II Dissolved Oxygen Meter
Extech DO600 Waterproof ExStik® II Dissolved Oxygen Meter
The ExStik® II DO600 meter displays Oxygen level as percent of Saturation from 0 to 200. 0 percent or Concentration from 0 to 20.00 ppm (mg/L). It features Adjustable Altitude Compensation (0 to 20,000 feet in 1,000 ft. increments), Adjustable Salinity Compensation from 0 to 50 ppt and an analog bargraph for indicating trends. DO600 meter includes a DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48″ (1.2m) neck strap.
Extech DO700 Portable Dissolved Oxygen Meter
Extech DO700 Portable Dissolved Oxygen Meter
The 9-in-1 DO700 Kit measures DO concentration/saturation, pH, mV, Temperature, Conductivity, TDS, Salinity, and Resistivity. It features automatic salinity compensation and manual barometric pressure compensation for DO measurements. In addition, it has automatic one button calibration of 4, 7 and 10 pH with a choice of three-point calibration for better accuracy and it provides automatic temperature compensation. Complete with DO probe, pH/mV/Temp electrode, polymer Conductivity cell, pH and Conductivity calibration solutions, batteries and hard carrying case.
Extech DO210 Compact Dissolved Oxygen Meter
Extech DO210 Compact Dissolved Oxygen Meter
The DO210 is a Dissolved Oxygen Meter which measures DO from 0 to 20.0mg/L, Oxygen Percent from 0 to 100.0% and Temperature with ATC. This meter features Adjustable Altitude and Salinity Compensation as well as min, max and data hold functions. Complete with DO probe with membrane and 39″ (1m) cable, two spare replacement membranes, electrolyte, 9V battery and soft case.
Extech DO600-K Waterproof ExStik® II Dissolved Oxygen Meter Kit
Extech DO600-K Waterproof ExStik® II Dissolved Oxygen Meter Kit
The DO600-K is a convenient kit which adds versatility for measuring dissolved oxygen in laboratories or out in the field with a 16-Foot (5m) extension cable and probe weight guard for taking easy measurements in tanks or streams. Complete with ExStik® II DO meter, DO electrode, protective sensor cap, DO603 replacement membrane Kit, 16-Foot (5m) extension cable, weighted probe guard, four 3V CR-2032 batteries, 48-Inch (1.2m) neck strap, and hard carrying case.
Smart Sensor AS8901 Oxygen Monitor
Smart Sensor AS8901 Oxygen Monitor
- Adopting electrochemical sensors, which gives a quick and accurate measurement.
- With a large LCD screen display the measured results, you can get oxygen concentration at a glance.
- The oxygen monitor has audio and visual alarm, you can set audio alarm decibels that can give you an obvious prompt.
- Automatic temperature compensation, stable measurement. Widely used in chemical industry, electronic industry, underground operations, in-car oxygen detection.
- Portable and handheld, easy to operate and carry.
Hanna HI-9142 Portable Dissolved Oxygen Meter
Hanna HI-9142 Portable Dissolved Oxygen Meter
The HI9142 is a rugged, portable, waterproof dissolved oxygen (DO) meter, with replaceable polytetrafluoroethylene (PTFE) membrane caps and protective shield, designed to provide reliable measurements under harsh environmental conditions. The HI9142 is supplied complete with polarographic probe, PTFE membrane caps, electrolyte fill solution, protective shield, and rugged carrying case.
Hanna HI-98193 Waterproof Portable Dissolved Oxygen and BOD Meter
Hanna HI-98193 Waterproof Portable Dissolved Oxygen and BOD Meter
For the measurement of DO, the HI98193 is supplied with the HI764073 polarographic dissolved oxygen probe. This probe uses preformed PTFE membrane caps that are field replaceable. The probe connects to the meter with a unique quick connect waterproof DIN connector allowing for a secure attachment without a threaded connect that is also easy to remove.
Hanna HI-8410 Dissolved Oxygen Controller
Hanna HI-8410 Dissolved Oxygen Controller
HI 8410 is a panel-mounted DO controller designed for simplicity of use in a wide range of industrial process applications. Dissolved Oxygen is indicated in mg/L (ppm) or in % of saturation in accordance with the selection switch on the back panel. The temperature can be measured in the range from -5 to 50 °C. The Dissolved Oxygen readings are automatically compensated for the temperature effects on the oxygen solubility and membrane permeability.
Hanna HI-9146 Portable Dissolved Oxygen Meter
Hanna HI-9146 Portable Dissolved Oxygen Meter
The HI9146 is a rugged, portable dissolved oxygen (DO) meter designed to provide laboratory precision and accuracy under harsh environmental and industrial conditions. This meter offers many features including automatic calibration, with auto-endpoint detection, and compensation for temperature, salinity, and altitude. The HI9146 is supplied complete with polarographic probe, PTFE membrane caps, electrolyte fill solution, and rugged carrying case.
Hanna HI-9147 Portable Galvanic Dissolved Oxygen Meter
Hanna HI-9147 Portable Galvanic Dissolved Oxygen Meter
The HI9147 is a rugged, water-resistant dissolved oxygen (DO) meter designed for aquaculture applications. The meter and probe use galvanic sensor technology where the electrodes’ potential difference drives the reaction, requiring no external voltage. Oxygen diffuses across the membrane and the system establishes a current proportional to the concentration of dissolved oxygen present.