Product Description

Hytera RD968

Karya Mandiri Techindo has a wide range of Hytera products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

The Hytera RD968 is a digital/analog Repeater suitable for outdoor use. Compact and lightweight, this device can be deployed quickly and carried in a backpack (optional), mounted on a wall or in a tool rack.

Features Hytera RD968

Multiple CTCSS/ CDCSS
Repeater Knockdown (Analogue & Digital)
IP Ports: 1
Telemetry
Audio Output for Slot A & B
Remote Programming via IP interface
Remote Diagnostic & Control Software available
Priority Scan
Digital Encryption: Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
Multiple Key Encryption Decode
Text Messaging via application software
Quick Text Messages Up to 25 pre-programmed via CPS (for telemetry use)

Specifications Hytera RD968

General
Frequency range		VHF: 136 – 174 MHz
		UHF: 350 – 400 MHz
		UHF: 400 – 470 MHz
Supported operating modes		DMR Tier II in acc. with ETSI TS 102 361-1/2/3
		Analog
Channel capacity		16
Zone capacity		1
Channel spacing		12.5 / 20 / 25 kHz (analog)
		12.5 kHz (digital)
Operating voltage		13.6 ± 15% VDC
		Storage battery: 14.8 V
Max. power consumption		(in stand by): ≤ 0.8 A
		(during transmission): ≤ 3.5 A
Standard battery		10 Ah (lithium-ion battery)
Battery life		(5-5-90 operating cycle, high transmitting power, standard battery): approx. 8 hours
Frequency stability		± 0.5 ppm
Antenna impedance		50
Dimensions (H × W × D)		52 × 183 × 302 mm (repeater with protective housing)
		42 × 172 × 280 mm (repeater without protective housing)
Weight		3.5 kg (without standard battery)
Ambient data
Operating temperature range		– 30 °C to +60 °C
Storage temperature range		– 40 °C to +85 °C
ESD		IEC 61000-4-2 (Level 4), ± 8 kV (contact), ± 15 kV (air)
Dust and water protection		IP67
Shock and vibration resistance		MIL-STD-810 C/D/E/F/G
Relative humidity		MIL-STD-810 C/D/E/F/G
GPS
Time to rst position recognition (TTFF) cold start		< 1 minute
Time to rst position recognition (TTFF) warm start		< 10 seconds
Horizontal accuracy		< 10 meter
Transmitter
Transmitting power		1 – 10 W (adjustable)
Modulation		11 K0F3E at 12.5 kHz
		14 K0F3E at 20 kHz
		16 K0F3E at 25 kHz
4FSK digital modulation		12.5 kHz (data only): 7K6ΦFXD
		12.5 kHz (data and voice): 7K6ΦFXW
Interfering signals and harmonics		– 36 dBm (< 1GHz)
		– 30 dBm (> 1GHz)
Modulation limiting		± 2.5 kHz at 12.5 kHz, ± 4.0 kHz at 20 kHz, ± 5.0 kHz at 25 kHz
Hum and noise		40 dB at 12.5 kHz
		43 dB at 20 kHz
		45 dB at 25 kHz
Adjacent channel selectivity		60 dB at 12.5 kHz
		70 dB at 20 / 25 kHz
Audio sensitivity		+1dB at – 3 dB
Nominal audio distortion		≤ 3%
Digital vocoder type		AMBE+2™
Receiver
Sensitivity (analogue)		0.3 μV (12 dB SINAD)
		0.22 μV (typical) (12 dB SINAD)
		0.4 μV (20 dB SINAD)
Sensitivity (digital)		0.3 μV / BER 5 %
Adjacent channel selectivity		TIA-603: 65dB at 12.5 kHz / 75dB at 20 / 25 kHz
		ETSI: 60dB at 12.5 kHz / 70dB at 20 / 25 kHz
Intermodulation		TIA-603: 75 dB at 12.5 / 20 / 25 kHz
		ETSI: 70 dB at 12.5 / 20 / 25 kHz
Spurious response rejection		TIA-603: 75 dB at 12.5 / 20 / 25 kHz
		ETSI: 70 dB at 12.5 / 20 / 25 kHz
Hum and noise		40 dB at 12.5 kHz
		43 dB at 20 kHz
		45 dB at 25 kHz
Nominal audio power output		0.5 W
Nominal audio distortion		≤3%
Audio sensitivity		+1dB at – 3 dB
Conducted spurious emission		< – 57 dBm