Product Description

Icom IC-A120

Karya Mandiri Techindo has a wide range of Icom products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Top Performance Mobile Airband Radio with Active Noise Cancelling and Bluetooth^® Wireless Connectivity

Features Icom IC-A120

High Visibility, Simple Operation

The full dot-matrix LCD allows for high visibility and clearly shows alphanumeric characters and icons. Programming memory channels and other radio settings can be simply made from the front panel by radio users. These customizing functions can also be restricted, depending on the radio settings.

Optional Bluetooth^® Headset Connectivity

With the optional UT-133A Bluetooth^® unit, the IC-A120 can be used with a third-party wireless Bluetooth^® headset. Also, using the optional VS-3 Bluetooth^® headset, the side tone function is available.

Active Noise Cancelling (ANC)

The newly added built-in ANC reduces background noise in the received and transmitting signals. This function is effective in extremely noisy airport environments full of aircraft noise. The automatic noise limiter (ANL)* reduces pulse-type noise such as engine ignition.

* The ANL and ANC functions cannot be used at the same time.

IP54 Dust-Protection and Water Resistance

The IC-A120 has IP54 dust-protection and water resistance. This construction allows for use in open-air vehicles.

Dualwatch and ON-Hook Scan Functions

The dualwatch function checks the priority and operating channels alternatively. The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel (according to the preprogramming).

Side Tone Function

When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.

Optional Speaker-Microphone, HM-217

Listen to received audio through the HM-217’s built-in speaker. From the speaker-microphone’s front panel, access up/down buttons and two programmable buttons (P1/P2) which can be used as a shortcut to activate frequently used functions.

Other Features

A total of 200 memory channels with 12-character channel names
Both 12- and 24- volt systems compatible
8.33 kHz* and 25 kHz channel spacing
36 W (P.E.P.) RF output power
Dualwatch and priority scan functions
Power on password protection
PC programming capability
CI-V Commands for external control
VE-PG3 RoIP gateway for interconnect with other radio devices

Specifications Icom IC-A120

General
Frequency range (Tx/Rx)	118.000–136.992MHz
Channel spacing	25kHz/8.33kHz
Type of emission	A3E (AM)
Number of memory channels	200 channels
Antenna connector	SO-239 (50Ω)
Power supply requirement	13.75V/27.5V DC
Current drain (at 13.75 V DC) Transmitting Receiving	5.0A (maximum) 4.0A (at AF max.), 0.5A (at stand-by)
Operating temperature range	-30°C to +60°C;
Frequency stability	±5ppm (–30˚C to +60˚C)
Dimensions (W×H×D, Projections not included)	161×45×193 (mm); 6.34×1.77×7.6 (in) (approximately)
Weight (approx.)	1.5kg; 3.3lb

Transmitter
Output power (at 13.75V) (Carrier Power)	9.0W typ.
Modulation	70% to 100%
Spurious emissions (* Harmonics/Non-harmonics, 30MHz–1GHz)	Less than -60dBc
Microphone impedance	600Ω

Receiver
Intermediate freq.	38.85MHz/450kHz (1st/2nd)
Sensitivity (pd)	1 μV (6dB S/N)
Selectivity 8.33kHz 25kHz	2.778/7.37kHz (6dB/60dB) 8/25kHz (6dB/60dB)
Spurious response	More than 74dBμ
Audio output power Internal SP (8Ω load) External SP (8Ω load) Headphone (500Ω load)	10% distortion, 60% modulation) 1.5W typical More than 10W More than 100mW