Product Description
Icom IC-F4003
Hand Held Icom IC-F4003 is very easy to use no special training required. Range Frekuensi Icom IC-F4003 is UHF 350-400 MHz & 400-470 MHz Some of the knobs and buttons are easy to size for easy operation anyway and is designed to provide a non-slip, positive action – even when wearing gloves.
Features Icom IC-F4003
-
Simple operation for instant communication
The IC-F3003 series is so easy to use there’s no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
-
Easy to hear in noisy areas
The radio provides 1500 mW* loud and clear audio with Icom custom high power handling capacity speaker. Clear communication is available even in noisy environments.
* Typical with internal speaker
-
Optional 1500 mW Speaker-Microphone, HM-222HLWP*
The combination of the optional HM-222HLWP and the IC-F3003 series* also provides 1500 mW (typ.) loud audio from the attached speaker-microphone.
* For the transceiver with a “U” mark on the serial number label.
-
Longer operating time
A new high efficiency FET of the IC-F3003 series reduces consumption current and provides up to 22 hours* of operating time with the BP-298, 2250 mAh (typical) supplied battery pack.
*Tx:Rx:Standby=5:5:90. Power save function ON.
-
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111 mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental tests. In short, the IC-F3003 series is built rugged!
-
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004LA can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
-
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signaling gives you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
-
Scan features
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.
Other Features
- DTMF autodial
- CTCSS/DTCS encoder/decoder
- BIIS PTT ID transmission
- MDC PTT ID and emergency
- Low battery alert
- 2-step power save
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Enhanced emergency
- 3-color LED
- Surveillance function
Specifications Icom IC-F4003
General
IC-F3003 | IC-F4003 | |||
---|---|---|---|---|
Frequency range (Varies according to version) |
136 MHz–174 MHz | 450–520 MHz 400–470 MHz |
||
Number of memory channels | 16 channels | |||
Type of emission | 11K0F3E/16K0F3E | |||
Channel spacing | 12.5 kHz/25 kHz | |||
Power supply requirement | 7.2 V DC | |||
Current drain (approximate) |
Tx | High | 1.3 A | 1.6 A |
Rx | Stand-by | 75 mA | 70 mA | |
Max. audio | 500 mA (Internal SP) | |||
Antenna impedance | 50 Ω | |||
Operating temperature range | –30°C to +60°C, –22°F to +140°F (Radio only) | |||
Dimensions (W×H×D) (Projections are not included) |
58×111×35.5 mm, 2.3 × 4.4 × 1.4 mm (With BP-298) |
|||
Weight (approximate) | 265 g, 9.3 oz (With BP-298) |
Transmitter
IC-F3003 | IC-F4003 | |
---|---|---|
RF output power (at 7.2V DC) | 5 W, 2 W, 1 W (Hi, L2, L1) | |
Max. frequency deviation | ± 5.0 kHz/±2.5 kHz (Wide/Narrow) | |
Frequency stability | ±2.5 ppm | |
Spurious emissions | 70 dB minimum | |
Residual modulations | 58/53 dB typical (Wide/Narrow) |
53/48 dB typical (Wide/Narrow) |
Audio harmonic distortion (AF 1 kHz 40% deviation) |
1.0%/1.5% typical (Wide/Narrow) |
Receiver
IC-F3003 | IC-F4003 | ||
---|---|---|---|
Sensitivity (at 12dB SINAD) | 0.25dBμV typical | ||
Adjacent channel selectivity (W/M/N) | 78 dB/70 dB typical | 73 dB/65 dB typical | |
Spurious response rejection | 70dB minimum | ||
Intermodulation rejection | 75 dB typical | 74 dB typical | |
AF output power (at 5% distortion 8Ω load ) |
Internal SP | 1500 mW typical | |
External SP | 400 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected*) |
* For the transceiver with “U” make on the serial number label.
Supplied Accessories:
- BP-298, Battery pack
- BC-240, Desktop charger
- BC-242, AC adapter
- MB-124, Belt clip
- Antenna
Icom IC-F4003 – Manual
Produk asli Kami distributor langsung Icom . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.