Product Description
Icom IC-FR6000
Karya Mandiri Techindo has a wide range of Icom products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
Features Icom IC-FR6000
-
Two RF Modules in One Unit
The IC-FR5000/FR6000 series has an internal space for installing an optional RF unit, UR-FR5000 or UR-FR6000. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
-
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*
Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* Ambient temperature: 25°C
-
50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*
When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
-
19-inch Rack Mount Design, 2U Height Low Profile Design
The IC-FR5000/FR6000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.
-
Multiple CTCSS and DTCS Tone Decode
The IC-FR5000/FR6000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.
-
Base Station Operation
The IC-FR5000/FR6000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.
Other Features
- Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
- 5-Tone and DTMF encoder/decoder
- CW ID transmitter
- Normal and priority scan setting
- Wide frequency coverage
- Built-in audio compander
- Built-in inversion type voice scrambler** Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
Specifications Icom IC-FR6000
General | |||
---|---|---|---|
Frequency coverage | 136-174 MHz 400-470 MHz, 450-520 MHz |
||
Number of channels | Max. 32 channels | ||
Channel spacing | 6.25/12.5/25 kHz 7.5/15.0/30 kHz |
||
PLL channel step | 2.5, 3.125 kHz | ||
Frequency stability | ±0.5ppm | ||
Operating temperature range | -30°C to +60°C -22°F to +140°F |
||
Power supply voltage | 13.6V DC | ||
Current drain (at 13.6 V DC) Tx Rx |
|
||
Antenna impedance | 50Ω (Type-N × 2) | ||
Dimensions (W×H×D) | 483 × 88 × 260 mm 191⁄32 × 315⁄32 × 101⁄4 in |
||
Weight | 5.6 kg; 12.3lb (approx.) |
Transmitter | |
---|---|
Output power | 50W (adjustable to 5W) 25W at 100% duty cycle |
Max. frequency deviation | ±5.0 kHz/±2.5 kHz (wide/narrow) |
Spurious emissions | 80dB typ. |
Adjacent channel power | 73/67dB typ. (wide/narrow) |
FM Hum and noise | 50/45dB typ. (wide/narrow) |
Audio harmonic distortion | 1% typ. (40% deviation) |
Microphone impedance | 600Ω (8-pin modular) |
Receiver | |
---|---|
Sensitivity FM (W/N) Digital |
0.30µV typ. (at 12dB SINAD) 0.25µV typ. (at 5% BER) |
Spurious response | 90dB |
Intermodulation rejection ratio | 78dB |
Hum and noise ratio | 50/45dB (wide/narrow) |
Audio output power | 4.0 W typ. at 5% distortion with a 4 ohm load |
External speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/4Ω |
Supplied Accessories
- DC power cable
- Handle kits
- Key assign stickers
Icom IC-FR6000 – Manual
KARYA MANDIRI TECHINDO adalah Supplier Icom IC-FR6000 dan juga menjual Brand Icom. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].