Rugged Workhorse Radio with Powerful Audio
Impressive audio output volume, long-lasting power, plenty of memory channels, rugged construction, rich in analog features – the T70A offers practical 2m/70cm dual band operation and ruggedness, updated for today’s ham radio enthusiasts.
700mW loud audio
The IC-T70A uses a BTL (bridge-tied load) amplifier that doubles the audio output. The 36mm large speaker delivers 700mW of loud and intelligible audio* even in noisy environments.
Long lasting battery life
Get 5W of power on VHF and UHF in a small, lightweight package. The BP-264 Ni-MH battery offers over 10 hours of power on a single charge*. The optional, even lighter BP-265 Li- Ion battery pushes operation to 13.5 hours*. And an optional AA alkaline battery case is ideal for long storage or quick back-up.
External DC power jack
An external DC power jack allows for operation and charge when used with an external DC power supply (10-16V DC).*
A total of 302 memory channels
With 302 alphanumeric memory channels, including 50 band edges and 2 call channels, the IC-T70A gives you flexible scanning lists. With a maximum of 26 memory banks*, you can pick and choose the desired banks for scanning from the 250 memories.
CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. Pocket beep alerts you when a matching tone frequency is received. Tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function
The IC-T70A has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation when used with a compatible optional headset and plug adapter cable. Also, the VOX level and VOX delay time are adjustable.
IP54 and MIL-STD-810 rugged construction
Dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-T70A tested to and passed MIL-STD-810 environmental tests.
- WX channel and WX alert function (USA version only)
- Power save function
- SMA type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-T70
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- 16 DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
Specifications Icom IC-T70A
|Frequency range (unit: MHz)
*1guaranteed 144-148 MHz, 440-450 MHz
|Type of emissions||F2D/F3E (FM)|
|Number of memory ch.||302 (incl. 50 scan edges and 2 call)|
|Antenna impedance||50 Ω (SMA)|
External DC power
|7.2V DC (with BP-264)
|Frequency stability||±2.5 ppm -20°C to +60°C basis of 25°C|
(at 7.2V DC or 13.5V DC)
|Operating temperature range||-20°C to +60°C
-4°F to +140°F
(projections not included)
|58(W) × 111(H) × 30(D) mm
29⁄32(W) × 43⁄8(H) × 13⁄16(D) in
|Weight||380g; 13.4oz (with BP-264 and Ant.)|
|Output power (at 7.2 V DC)||5.0W/2.5W/0.5W (high/mid/low)|
|Spurious emissions||Less than -60 dBc (high/mid)
Less than -13dBm (low)
|Max. freq. deviation||±5 kHz/±2.5 kHz (wide/narrow)|
|Ext. MIC connector||3-conductor 2.5(d) mm (1⁄10″)/2.2kΩ|
|Sensitivity (at 12dB SINAD)||0.18 µV (guaranteed range)|
|Squelch sensitivity (at threshold)||0.18 µV typical|
More than 60dB
Less than 60dB
|Spurious and Image rejection ratio||More than 60dB (VHF)|
|Audio output power (at 10% distortion)||More than 700mW (internal SP, 16Ω
More than 400mQ (external SP, 8Ω
|Ext. SP connector||3-connector 3.5 (d) mm (1⁄8″)/8Ω|
- Antenna, FA-S270C
- Belt clip, MB-124
- Battery pack, BP-265
- Rapid charger, BC-193
- Hand strap
Jual Icom IC-T70A dengan harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah Indonesia.
Jika anda butuh penawaran dan info Stok silahkan hubungi sales kami di No Telpon 0821 2742 8667 Telpon/SMS/Whatsapp.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.