Product Description
Lutron DT-2239A Digital Stroboscope
DT-2239A DIGITAL STROBOSCOPE is a microprocessor circuit design, high accuracy, digital readout, light duty STROBOSCOPE/TACHOMETER that is ideal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance. , production, quality control, laboratories and as well as for schools and colleges for demonstrating strobe action.
Ideal for inspecting and measuring the speed of moving gears, fans, centrifuges, pumps, motors and other equipment used in general industrial maintenance, production, quality control, laboratories
Features Lutron DT-2239A Digital Stroboscope :
- Battery power Stroboscope, flash light use high intensity LED array, long life.
- Stroboscope, wide measuring range up to 99,999 RPM.
- Back light high visible LCD display gives exact reading with no guessing or error and saves battery energy.
- High precision both for Stroboscope. measurement.
- Use an exclusive one chip MICRO-PROCESSOR LSI-circuit and crystal time base to offer high accuracy measurement & fast measuring time.
- Compact and heavy duty housing case.
Specifications Lutron DT-2239A Digital Stroboscope :
| Stroboscopic Flash Rate | 100 to 10,000 FPM |
| Accuracy | 100 to 5000 FPM / RPM : ± 1 digit |
| Over 5000 FPM / RPM : ± 0.05% | |
| Resolution | Less than 10,000 FPM / RPM : 1 FPM / RPM |
| Over 10,000 FPM / RPM : 10 FPM / RPM | |
| Sampling Time | 1 second. |
| Circuit | Custom one chip of microcomputer LSI circuit |
| Flash Tube | Xenon white lamp 6,500 K degree. |
| Beam Angle | 80 |
| Calibration | Crystal time base and microprocessor circuit, don’t necessary take any external calibration process. |
| Power Requirements | AC 220 |
| Dimension/Weighting | 210 x 120 x 120mm (1000g) |
| Accessories Included | Unit Operation manual |
|---|
FLASH TUBE SPECIFICATIONS
| Flash tube | Xenon lamp. |
|---|---|
| Flash Duration | Approximately 60 to 1,000 microseconds. |
| Flash color | Xenon white 6,500 K degree. |
| Flash energy | 4 Watts-seconds (joules). |
| Beam Angle | 80 |
| Flash tube replacement | It is required to change the flash tube when the instrument start to flash irregularly at speeds of 3600 RPM/FPM or more. |
| Operating duty Cycle | For prolong life and safe operation, please adhere to the following duty cycle: Below 1,000 RPM – 30 Minutes. Above 3,600 RPM – 5 Minutes. Always allow a 10 minute cooling off period between cycles. |
Lutron DT-2239A – Datasheet
Produk asli Kami distributor langsung Lutron. Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.
