Product Description
Lutron DW-6095 3 Phase Power Analyzer With Harmonic Measurement
Karya Mandiri Techindo has a wide range of Lutron products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
Lutron DW-6095 3 Phase Power Analyzer With Harmonic Measurement is a three-phase wattmeter – power analyzer (1f/2w; 1f/3w; 3f/3w; 3f/4w); active power (KW MW GW); apparent power (KVA MVA GVA); reactive power (KVAR MVAR GVAR); energy (WH SH QH PFH); Power factor (PF); phase angle ( ø ); frequency; calculation of unbalanced current through the neutral conductor. Built-in clock and calendar, real-time data recording to SD card. Adjustable sampling: 2 to 7200 seconds.
True-RMS voltage and current measurement (UAC: 10V ~ 600V; IAC: 0.2A ~ 3000A). Display of up to 50 harmonics. Simultaneous display of harmonics and waveform. The input impedance for UAC measurement is 10 MΩ. Progress display including peak values.
Features Lutron DW-6095 3 Phase Power Analyzer With Harmonic Measurement
- Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W
- 3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary
- Current probe input signal/ranges with selection :
Input signal (ACV) : 200 mV/300 mV/500 mV/1 V/2 V/3 V
Ranges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A - Meter can cooperate the universal current probes
- Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe ( CP 1201 ), AC to DC 9V adapter, 2 G SD memory card and Carrying bag
- Measurement :
V (phase-to-phase), V (phase-to-ground) A (phase-to-ground)
KW / KVA / KVAR / PF (phase)
KW / KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
Phase angle - Harmonics display (1-50th order)
- Simultaneous display of Harmonics and Wave form
- Display of Waveform with Peak Values
- Analysis of Total Harmonic Distortion ( THD )
- Graphic Phase diagram with 3-Phase system parameters
- 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor
- Calculated Unbalanced Current through Neutral Line ( An )
- Capture Transient events (including Dip, Swell and Outage ) with programmable threshold ( % )
- Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 )
- ACV input impedance is 10 Mega ohms
- Safety Standard : IEC 1010, CAT III 600V
- Powered by AA ( UM-3 ) DC 1.5 V X 8 batteries ( Alkaline type ) or DC 9V adapter
- Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition software, SW-811
- Optional current probes : CP-1201, CP-2000, CP-200, CP-3000, detail specification
- User can order the meter only ( without the current probes ) with the special request as intend to cooperate their own current probes
- Patented
Specifications Lutron DW-6095 3 Phase Power Analyzer With Harmonic Measurement
- Circuit: Custom one-chip of microprocessor LSI circuit
- Display:
* LCD Size : 81.4 X 61 mm ( 3.2 X 2.4 inch )
* Dot Matrix LCD (320 X 240 pixels ) with back light - Measurement:
* V (phase-to-phase)
* V (phase-to-ground)
* A (phase-to-ground)
* KW / KVA / KVAR / PF (phase)
KW / KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
* Power factor
* Phase angle
* Frequency
* Harmonics display. - Wire connections: 1P/2W, 1P/3W, 3P/3W, 3P/4W
- Voltage ranges: 10 ACV to 600 ACV, auto range
- Current probe input signal and range:
* Current probe input signal volage ( ACV ) : 200mV/300mV/500mV/1V/2V/3V
* Current probe input current range ( ACA ) : 20 A/200A/2000A (1200 A)/30A/300A/3000A
* Meter can cooperate the universal current probe. - Safety standard: IEC1010 CAT III 600 V.
- ACV input impedance: 10 Mega ohms.
- Range select:
* ACV: Auto range.
* ACA: Manual range - Clamp frequency response: 40 Hz to 1 KHz.
- Spec. tested frequency: 45 to 65 Hz.
- Over load protection:
* ACV: 720 ACV rms
* ACA: 1300 ACA with clamp probe - Data Hold: Freeze the display reading.
- Data Record: SD Card Record.
- Sampling Time: Approx. 1 second.
- Power ON/OFF: Manual OFF by push button
- Over Indicator:
* LCD display show ” OL “.
* The data save into the SD card will show ” 9999 ” or ” 999 ” ( overleap the decimal point ) - Under Indicator:
* LCD display show ” UR “.
* The data save into the SD card will show ” 9999 ” or ” 999 ” ( overleap the decimal point ). - Real time data logger:
* Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information ( year/month/data/hour/minute/second ) down load to the Excel
* Sampling time for data logger : 2 seconds to 7200 seconds, the during of setting step are 2 seconds. - Data Output USB/RS232: RS232 computer serial interface :
* Connect the optional USB cable USB-01 will get the USB plug.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug. - Operating Temperature: 0 to 50 ℃ ( 32 to 122 ℉).
- Operating Humidity: Less than 80% R.H..
- Power Supply:
* DC 1.5V, AA ( UM-3 ) Battery X 8 PCs (Alkaline or heavy-duty battery).
* AC to DC 9V power adapter. - Power Consumption:
* Meter : 500 DCmA.
* Clamp : 34 DCmA. - Clamp max. conductor Size: 50 mm ( 2.0 inch ) Dia
- Weight:
* Meter : 948g ( includes batteries )
* Clamp ( includded cable ) : 467g - Dimension:
* Meter : 225 X 125 X 64 mm ( 8.86 X 4.92 X 2.52 inch )
* Clamp : 210 X 64 X 33mm ( 8.3 X 2.5 X 1.3 inch )
* Clamp Jaw : 86 mm (3.4 inch)- outside
Accessories Included:
- Instruction manual…………… 1 PC
- Test Leads (TL88-4AT)………. 1 Set (4 PCs)
- Alligator clips (TL88-4AC) 1 Set (4 PCs)
- Clamp Probe ( CP-1201 )……. 3 PCs
- AC to DC 9V adapter…………..1 PC
- SD card ( 2 G )……………….. 1 PC
- Carrying bag……………………. 1 PC
Optional Accessories:
- 2000 Amp current probe, CP-2000
- 200 Amp current probe, CP-200
- Flexible 3000 Amp current probe, CP-3000
- USB Cable , USB-01
- RS232 cable, UPCB-02
- Data Acquisition software, SW-U811
Lutron DW-6095 – Datasheet
KARYA MANDIRI TECHINDO adalah Supplier Lutron DW-6095 3 Phase Power Analyzer With Harmonic Measurement dan juga menjual Brand Lutron. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].
