Product Description
Lutron VT-8204 Vibration/Tachometer
Karya Mandiri Techindo has a wide range of Lutron products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
Vibration
Applications for industrial vibration monitoring: All industrial machinery vibrates. The level of vibration is a useful guide to machine condition. Poor balance, misalignment & looseness of the structure will cause the vibration level increase, it is a sure sign that the maintenance is needed.
Tachometer
Laser beam detection source, long measuring range up to 1.5 meters, useful in RPM measurement applications where the machine would pose a risk to the operator or close access is difficult or impossible.
Features Lutron VT-8204 Vibration/Tachometer
Vibration Function
- Acceleration range: 200 m/s^2
- Velocity range : 200 mm/s
- Displacement ( p-p ) range : 2 mm
- Metric and imperial display unit
- RMS measurement for Acceleration and Velocity
- Peak to peak measurement for Displacement
- Peak function for Acceleration and Velocity
- Max. hold function for Acceleration (peak)
- Velocity ( peak ) and Displacement (peak to peak)
- Frequency range 10 Hz – 1 kHz, sensitivity relative meet ISO 2954
- Zero function, executed by front buttons
- Data logger function with flexible sampling time selection, can save max. 1000-point data into the memory circuit
- Data hold button to freeze the desired reading
- Memory function to record maximum and minimum reading of RMS value ( Acc., Vel. ) or Displacement (p-p)
Tachometer Function
- The best Tachometer in the world. 2 in 1, one instrument combine Photo Tachometer & Contact Tachometer
- Wide measuring range from 0.5 to 100,000 RPM, 0.1 RPM resolution for the measured value < 1000 RPM
- Microprocessor based circuit, crystal time base, high precision with 0.05% accuracy
- Memory with recall function, the last value, max., value, min
Specifications Lutron VT-8204 Vibration/Tachometer
| Vibration function | Tachometer ( photo, contact ) function |
| Velocity range: 0.5 to 199.9 mm/s 0.05 to 19.99 cm/s 0.02 to 7.87 in/s |
Range : ° Photo Tachometer : 10 to 99,999 RPM ° Contact Tachometer : 0.5 to 19,999 RPM ° Surface Speed ( m/min. ) : 0.05 to 1,999.9 m/min. ° Surface Speed ( ft/min. ) : 0.2 to 6,560 ft/min. |
| Acceleration range : 0.5 to 199.9 m/s^2 0.05 to 20.39 g 2 to 656 ft/s^2 |
Accuracy : ± ( 0.05 % + 1 digit ). |
| Displacement ( p-p ): 0.005 to 1.999 mm 0.002 to 0.078 inch |
Resolution : 0.1 RPM < 1,000 RPM 1 RPM 1,000 RPM 0.01 m/min. < 100 m/min. 0.1 m/min. 100 m/min. 0.1 ft/min. < 1000 ft/min. 1 ft/min. 1,000 ft/min. |
| Frequency range : 10 Hz to 1 KHz * Sensitivity relative during the the frequency range meet ISO 2954 Refer to table 1, page 28 |
Time : base Quartz crystal Sampling Time : Photo Tachometer – 1 sec. ( 60 RPM ). Contact Tachometer – 1 sec. ( 6 RPM ). |
| Function : ° Velocity : RMS, Peak, Max. hold (peak). ° Acceleration : RMS, Peak, Max. hold (peak). ° Displacement : p-p, Max. hold (p-p). |
Photo Tachometer detecting distance : 50 – 1,500 mm typically. * Spec. of detecting distance are that under the size of reflecting tape is 10 mm square & the measuring RPM value is 1,800 PPM The max. & min. detecting distance may change under different environment, different reflecting tape or the measuring RPM beyond 1800 RPM |
| * Peak : To measure the peak value. * p-p : Peak to peak value * Max. hold : To hold the max. peak or p-p value. |
Laser light source * Photo Tach : * Less than 1 mW * Class 2 laser diode. Red. Wave length is 645 nm approximately. |
| ° Accuracy : ± ( 5 % + 2 d ) reading , 160 Hz, 80 Hz. * 23 ± 5 ℃ | Memory : Last value, Max. value, Min. value. |
Accessories included :
- Instruction manual 1 PC
- Vibration sensor 1 PC
- Magnetic base 1 PC
- Reflecting tape marks (600 mm) 1 PC
- RPM cone rubber, AS-35A 1 PC
- RPM funnel rubbe, AS-35B 1 PC
- Carrying Case 1 PC
Optional products :
- Data Acquisition software, SW-U801-WIN
- Data Logger software SW-DL2005
- USB cable USB-01
- IR Temp. probe IR-962
Lutron VT-8204 – Datasheet
KARYA MANDIRI TECHINDO adalah Supplier Lutron VT-8204 Vibration/Tachometer dan juga menjual Brand Lutron. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].
