CEM DT-6605 Digital High Voltage Insulation Tester
CEM DT-6605 Digital High Voltage Insulation Tester
- Test Voltages of 500V, 1000V, 2500V, and 5000V
- Measure Insulation Resistance to 60G
- Large 6000 count display with bar-graph and backlight
- Polarization Index measurement (PI)
- Dielectric Absorption Ratio measurement (DAR)
- AC/DC Voltage measurement from 0 to 600V with Max/Min, Peak and Relative functions
- 1 to 15 minute timer function for IR measurements
CEM AT-9996 True RMS Digital Multimeter with Oscilloscope
CEM AT-9996 True RMS Digital Multimeter with Oscilloscope
- Large 50,000 count 320 x 240 TFT color LCD display
- 10MHz/50MS/s bandwidth/Real time sample rate
- Logging function with TrendCapture for easy review of logged data
- Bluetooth PC interface for easy data transfer & accuracy calibration
- 100kHz/100kHz bandwidth (voltage/current)
- AC, AC+DC true-RMS measurements
- Records events and trends
- Saves measurements
CEM GD-3803 Multiple Gas Analyzer with Temperature and Humidity
CEM GD-3803 Multiple Gas Analyzer with Temperature and Humidity
The GD-3803 is a multiple gas analyzer that can measure Oxygen, Carbon Monoxide and Carbon Dioxide, it can also measure the air temperature and the humidity. It has a rechargeable battery and can save up-to 500 data points.
- Oxygen Range 0~30% VOL
- Oxygen Resolution 0.1%
- 500 data points
- Rechargeable Battery
- Auto Power Off
CEM DT-802D Desktop Indoor Air Quality CO2 Monitors
CEM DT-802D Desktop Indoor Air Quality CO2 Monitors
- Carbon Dioxide (CO) 0 to 9,999ppm
- Resolution 1ppm
- Temperature 23 to 122°F (-5 to 50°C)
- Checks for Carbon Di-Oxide (CO2 ) Concentration
- Maintenance Free NDIR (Non Destructive infra-red) CO2 sensor
- Indoor Air Quality Display in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
CEM DT-967 Desktop Indoor Air Quality CO2 Monitor
CEM DT-967 Desktop Indoor Air Quality CO2 Monitor
- Measures Carbon Dioxide (CO2), Air Temperature and Humidity with user adjustable high/low alarms and choice of datalogging model with memory 999 points
- White Color LED Dot Matrix Display
- Checks for Carbon Dioxide (CO2) concentrations (0 to 9,999ppm) and displays Temperature (14 to 140°F / -10 to 60°C) and Relative Humidity (0.1 to 99.9%) readings
- NDIR (non-dispersive infrared) CO2 sensor
- Indoor Air Quality displayed in ppm with Good, Normal, Poor indication
- Max/Min CO2 value recall function
CEM DT-853 Pinless Moisture Meter
CEM DT-853 Pinless Moisture Meter
- Measuring Range 0.0~100.0 %
- Resolution 0.1
- Quickly indicate the moisture content of materials
- CM % measured function
- Depth of penetration about 20-40mm with alarms
- Programmable moisture and humidity alarms
- Auto Power Off & low battery indication
- White Backlit LCD Display
CEM DT-8806S Non-Contact Forehead IR Thermometer
CEM DT-8806S Non-Contact Forehead IR Thermometer
CEM DT-8806S is a medical grade thermometer equipped with advanced technology and a sensitive sensor that provides accurate readings in one second. Zero contact design provides a safe and hygienic experience with little risk of cross contamination. The thermometer will provide results with a reading distance of 2-5 inches from the target surface.
CEM DT-322 Digital Thermo-Hygro Meter
CEM DT-322 Digital Thermo-Hygro Meter
- Temperature Range 0~50℃/32~120℉
- Environment Comfort Display:COMFORT,WET,DRY
- Time/Temperature/Humidity display
- ℃/℉ Temperature units the way self-locking switch show
- Highest/Lowest Temperature and Humidity memory function
- Calendar shows the whole point timekeeping, daily alarm functions, 12/24 hour clock
CEM AT-10 Digital Contact / Non-contact Tachometer
CEM AT-10 Digital Contact / Non-contact Tachometer
The CEM AT-10 Digital Contact/Non-contact Tachometer provides fast and accurate contact and non-contact high RPM measurements and measures the speed of rotating rotating surfaces.
- Wide measuring range and high resolution
- 40 reading memory
- Built-in laser pointer
- 5 digit LCD display
CEM DT-8894 CMM/CFM Thermo-Anemometers
CEM DT-8894 CMM/CFM Thermo-Anemometers
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Resolution of 0.01m/sec
- 20 points average for Air Flow
- Super large (9999 counts) LCD Backlit Display
- 3% velocity accuracy via low friction 2.83″D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
- MAX/MIN, Data Hold functions