Product Description

Lutron LCR-9172 LCR Meter

Discharge inductor before measurement.
If want to get accurate value, please test component into “Terminal pin” or test via optional SMD tester, SMDA-22 or SMD test clip, SMDC-21.

Fatures Lutron LCR-9172 LCR Meter

6000 counts ADC resolution.
Dual power supply , Battery or AC/DC Adapter.
High performance analog front end for impedance (Z) measurement.
Support Z / DCR measurement for LCR mode.
Four different test frequency are available : 100 Hz/120 Hz/1 KHz/10 KHz for L/C/R measurement.
Built-in simple DMM front end circuit to support DCV mode.
Test range : ( ex. F = 1 KHz )
º L : 600.0 uH to 60.00 H
º C : 600.0 pF to 600.0 uF
º R : 60.00Ω to 20.00 MΩ
Low battery voltage detector.
Min. source resistance : 120Ω typical.
6 ratio resistor range used for LCR mode.
Support buzzer sound driver with driving pattern & frequency selectable.

Specifications Lutron LCR-9172 LCR Meter

Display: LCD size：46.5 X 45.5 mm.
Test frequency: 100 Hz/120 Hz/1 KHz/10 KHz
Mode:
º L/C/R:
* L/C/R Function selector
* Frequency selector
* D/Q/θ selector
* SER/PAL selector
º DCV: DCV
Dissipation factor: 0.000 to 9999
Quality factor: 0.000 to 9999
θ measurement: ± 90°
Calibration: Open/Short calibration
Data Hold: Freeze the display reading
Power off: Auto shut off (10 min) saves battery life or manual off by push button
Operating temperature: 0 ℃ to 50 ℃
Operating humidity: Less then 85% R.H.
Power Supply:
º 006P DC 9V battery
* Alkaline or Heavy duty type
º DC 9V adapter input
* AC/DC power adapter is optional.
*Auto power off function will be disable.
Power consumption: DC 6 mA approximately (Backlight off )
Dimension: 151 x 78 x 43mm
Weight: 235 g * meter only