NOVOTEST TP-2020 Coating Thickness Gauge

Category Brand
NOVOTEST TP-2020 Coating Thickness Gauge

Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).

Product Description

NOVOTEST TP-2020 Coating Thickness Gauge

Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).

Advantages

  • Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals
  • Automatic sensor detection
  • Wide range of sensors for different tasks
  • Selecting units of measure
  • Storing individual calibrations in probes memory
  • Average calculation, minimum and maximum indication
  • High measurement accuracy
  • Transfer of measurement data to PC via usb
  • Portability
  • Large buttons
  • Enlarged screen
  • Shockproof housing with a special protective silicone bumper case
  • Charge control

Specifications NOVOTEST TP-2020 Coating Thickness Gauge

Thickness measurement range(depends on probe type) 0 µm … 60 mm
Measured parameter coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature
Measuring units μm, mm, inch, mil
Revision modes calculation of average, indication of minimum and maximum
PC connection yes
Menu languages English, Espanol, French, Russian
Dimensions, mm 122x60x25
Operating temperature range, ° C -20 … +40 ° C
Batteries 2 AA
Type of connectors of probes Lemo
Storage of measurement results and PC software (optional) 256
Standards AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32,  ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159
Time of continuous work hours, not less 20
Weight of electronic unit with batteries, no more, kg 0.2

Specifications of probes for NOVOTEST TP-2020 Coating Thickness Gauge

Coatings on steel (dielectric and conductive
coatings on ferromagnetic metals and alloys)
Type of probe Coating thickness measurement range Measurement accuracy Dimensions of the probe, mm Purpose
probe F-0,3  0-300 μm ±(0,03h+0,001) mm  Ø5×40 Measurement of paint, varnish and galvanic coatings
probe F-0,5  0-500 μm ±(0,03h+0,001) mm  Ø 8×15
probe F-2  0-2000 μm ±(0,03h+0,002) mm  Ø 10×35 Measurement of paint and varnish coatings
probe F-5  0-5000 μm ±(0,03h+0,002) mm  Ø 18×40 Measurement of paint, varnish and mastic coatings
Coating on the non-magnetic metals
(Any (dielectric or metal) coatings on non-ferrous metals and alloys)
probe NF-2  0-2000 μm ±(0,03h+0,002) mm  Ø 12×35 Measurement of anodic-oxide films and paint coatings
Thick coatings on metals (dielectric coatings on metals)
probe M-12  0-12 mm ±(0,03h+0,02) mm Ø 15×50 Measurement of mastic coatings
probe M-30  0-30 mm ±(0,03h+0,03) mm  Ø 40×50
probe M-60  0-60 mm ±(0,03h+0,05) mm  Ø 70×60
Measurement of surface roughness, Rz
(After abrasive blasting pre-painting work)
probe DSH  2-300 μm ±(0,03h+0,002) mm Ø 18×40 Measurement of surface roughness after sand and shot blasting
Temperature, humidity and dew point
probe DT  -50 … +80 ° C  + / – 1 ° C  Ø 12×107 Temperature measurement
probe DTVR Humidity: 0 – 100%
Temperature: -50 … 80 °C
Dew point: -15 – +40 °C
± 5%
± 1 ° C
± 2 ° C
Ø 50×120 Measurement of temperature, humidity and dew point

 

Standar Package
  • Thickness gauge electronic unit TP-2020
  • Standart probe ( by customer’s choice)
  • Set of reference thickness samples
  • Batteries (AA) – 2 pcs
  • Charger
  • USB cable
  • Operating manual
  • Case
Availabel Options
  • Additional probes for thickness gauge (depends on requirements)
  • Batteries
  • Set of reference thickness samples

 

 

NOVOTEST TP-2020 – Manual

KARYA MANDIRI TECHINDO adalah Supplier NOVOTEST TP-2020 Coating Thickness Gauge dan juga menjual Brand NOVOTEST. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].


Additional Information

Brand

Novotest

Model

TP-2020

Made In

Ukraine

Weight

2 kg

Accessories Included

Standart probe ( by customer’s choice)
Set of reference thickness samples
Batteries (AA) – 2 pcs
Charger
USB cable
Operating manual
Case

Product Enquiry

TESTIMONI PELANGGAN

alhamdulillah pesanan sudah sampai di Bengkulu. Pengalaman order di karyamandiritechindo.com Respon cepat. Pengiriman Cepat dan Free, Aman & Terpercaya.

Ibu Natalia Dan Ria
PT. AGricinal

Terimakasih karyamandiritechindo.com, orderannya sudah sampai dengan selamat Kurir Syariftama Express sangat ramah

PT. Bumi Bangun Perkasa
Ibu Rizeki

Order yg kedua, seperti biasa produk sangat memuaskan dan pelayannya ramah, Terimakasih Pak Aji Amanda Semoga di orderan berikutnya tetap TOP

PT. Daruna

Puas banget belanja di karyamandiritechindo.com. pengiriman cepat kualitas produk mantap.

PT. Niaga Andalan Serayat

BUAT PERMINTAAN HARGA