Product Description
Sanwa DCM2000DR Clamp Meter
Karya Mandiri Techindo has a wide range of Sanwa products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
The DCM2000DR is an AC/DC clamp meter/digital multimeter of the RMS value response type, designed for measurements in the range specified by IEC61010-1 CAT.IV 1000V. It is suitable for current and voltage measurements of low-voltage circuitry, electric equipment, and power supply facilities.
This instrument is capable of measuring both AC and DC currents and voltages. As the device also functions as a multimeter, it can perform a variety of functions such as measuring resistances, frequency, capacitances, performing diode tests as well as continuity tests with buzzer alarms.
The device can also measure electric field strength and features a low pass filter for VFD (Variable Frequency Drive) AC voltage measurement. The DCM2000DR has data hold, range hold and peak hold functions as well. The device is power efficient and features an auto power save feature that turns off the display after 34 minutes of inactivity (cancellable).
Features Sanwa DCM2000DR Clamp Meter
- Dual display shows voltage/current and its frequency
- True RMS
- EF (Electric Field) sensing
- VFD (Variable Frequency Drive) frequency measurement
- Low input impedance voltage measurement capable of attenuating the effects of ghost voltage
- Data hold, Range hold
- Relative value
- Peak hold (5msec.)
- Auto Power Save (30min.) (cancelable)
- Sampling rate : approx. 5 times / sec
Specifications Sanwa DCM2000DR Clamp Meter
| Function | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| ACA | 200.0/2000A | ±(2.0%+5) | 0.1A |
| DCA | 200.0/2000A | ±(2.0%+5) | 0.1A |
| ACV | 6.000/60.00/600.0/1000V | ±(1.2%+5) | 0.001V |
| DCV | 6.000/60.00/600.0/1000V | ±(0.5%+5) | 0.001V |
| Resistance | 600.0/6.000k/60.00k/600.0k/6.000M/40.00MΩ | ±(0.5%+5) | 0.1Ω |
| Frequency | 10～1999Hz | ±(0.1%+4) | 0.01Hz |
| Capacitance | 60n/600n/6μ/60μ/600μ/2000μF | ±(2.0%+5) | 0.01nF |
| Continuity | Buzzer sounds at below 10-200Ω Open voltage: approx. 0.5V | ||
| Diode test | Open voltage: approx. 1.8V | ||
| EF sensing | A voltage or electric field of about 60 V or more is detected. The bar graph and intermittent buzzer beeps change in three steps according to the field intensity. (50/60Hz) | ||
| Sampling rate | Approx. 5 times/sec. |
| Bandwidth | 50～400Hz |
| Display | 6000/1999（Hz) |
| Max. overload protection input | DC/AC1100V CT: DC/AC2000A |
| Clamp diameter/Conductor size | Φ55mm/20x66mm |
| Battery | R6Px2 |
| Battery life | A function: Approx. 80 hrs. Functions other than A: Approx. 240 hrs. (Zinc-carbon battery/Backlight off) |
| Size/Mass | H264×W97×D43mm/Approx. 640g |
| Safety standards | IEC61010 CAT.Ⅳ1000V |
Standard accessories:
- Test lead TL-29
- Carrying case C-DCM2000DR
Sanwa DCM2000DR – Datasheet
KARYA MANDIRI TECHINDO adalah Supplier Sanwa DCM2000DR Clamp Meter dan juga menjual Brand Sanwa. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].
