Product Description

Yokogawa 30032A Clamp-on Tester (Leakage Current)

Karya Mandiri Techindo has a wide range of Yokogawa products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

The 30031A and 30032A are small leakage current clamp meters by Yokogawa. The 30031A Clamp-On Leakage Current Tester has a sharp low pass filter function, and the 30032A Clamp-On Current Leakage Tester is capable of measuring from 1 mA AC. Both models of leakage current test equipment use mean value as their leakage current measurement method of detection and rms value calibration.

Specifications Yokogawa 30032A Clamp-on Tester (Leakage Current)

Description	Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp
Method of detection	Mean Value
Display	(Bar-graph display: 32 segments) LCD (Digital display: 3200 counts)
Range Switching	Auto-range
Operating temperature and humidity	0 – 50°, 80% RH or less (no condensation)
Influence of external magnetic field	0.0005% typical 1 (on current value of adjacent cable)
Influence of conductor position	Within accuracy
Safety Standard	Approved for conformity to EN 61010-1,EN 61010-2-032
Circuit voltage	300 Vrms or less
Withstanding voltage	3.7 kV AC for one minute
Power Supply	One CR2032 (Coin-shaped) 3 V battery
Battery Life	Approx. 90 hours (when continuously used)
Auto power-off	Approx. 10 minutes
Diameter of measurable conductor	40 at maximum mm
Dimensions	Approx. 70 (W) x 176 (H) x 25 (D) mm
Weight	Approx. 200 g
Accessories	Instruction manual, battery, Soft case
AC Current	3/30 mA, 30/60A
Frequency Characteristics	50/60 Hz
Accuracy (50/60Hz)	1.0 + 5 (0~30mA) 1.0 + 5 (0~50A) 5.0 + 5 (50~60A)
Measurement Cycle	2 times/second (Digital display), 12 times/second (Bar-graph display)
Temperature Coefficient	0.05% of range /°C or less (within the ranges of 0-18° and 28-50° for measurement of 0-50 A)
Note	Can measure leakage currents of 1 mA, which is useful for checking the insulation of low-voltage circuits and electrical components. Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60 A. Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%. Durability of clamp: More than 50,000 opening/closing events Twice the tensional strength of Yokogawa M&C’s earlier model clamps The clamp lever is lengthened by 30%, enabling smooth opening/closing of the clamp even for thick cables of 40mm in diameter. Approved for conformity to safety standards EN 61010-1 and EN 61010-2-032 (CAT III 300V, pollution degree2)

Selection Guide

DC Current Range	–
DC Current Resolution	–
AC Current Range	3/30mA 30/60A
AC Current Resolution	0.001mA
AC Current Frequency characteristics	50/60Hz
AC Current Method of detection	Mean Value
AC Voltage Measurement	–
DC Voltage Measurement	–
Continuity Check Measurement	–
Frequency Measurement	–
Temperature Measurement	–
Recorder output Function	–
Waveform monitor output Function	–
Data hold Function	O
Auto hold Function	–
Peak Hold Function	–
Maximum value memory Function	–
Mean value display Function	–
Filter Function	–
Range Hold Function	–
Auto ZERO Adjust Function	–
Auto power-off Function	O

Additional Specification

At 23°C±5°C，75%RH or less
Accuracy: ±( % rdg + dgt) = ±(% readout + value of least significant digit)

AC current	3/30mA, 30/60A
Frequency characteristics	50/60Hz
Accuracy	50/60Hz	1.0 + 5(0~30mA)
		1.0 + 5(0~50A)
		5.0 + 5 (50-60A)

Yokogawa 30032A – Brochure

KARYA MANDIRI TECHINDO adalah Supplier Yokogawa 30032A Clamp-on Tester (Leakage Current) dan juga menjual Brand Yokogawa. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].