Product Description
Icom IC-FR6200H
The Icom IC-FR6200H repeater uses high power performance supported by an IDAS system network, features such as analog FM and digital mode capabilities enable seamless connectivity for any operation. The IC-FR6200H repeater is equipped with plenty of power and functions for any task. 6.25 kHz spacing per channel significantly improves audio quality. Mixed digital/analog operating modes allow users to migrate at their own, simpler pace, and network interface options can expand communications while saving time.
The Icom IC-FR6200H receives and retransmits radio signals powerfully to help extend communications range and maintain clear voice quality.
Features Icom IC-FR6200H:
- CW ID transmission
- ±0.5ppm high frequency stability (Digital mode)
- 2U low profile for 19-inch rack mount
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- Built-in inversion voice scrambler (Analog mode)
- Built-in audio compander (Analog mode)
- PTT priority setting (Local Mic., external PTT or repeater operation)
- 5-Tone and DTMF encoder/decoder (Analog mode)
- Normal and priority scan
- Convenient key assign stickers supplied
- Beat cancel capability
- Low voltage alert (Analog mode)
Specifications Icom IC-FR6200H:
General |
||||
Frequency coverage | FR5200H | FR6200H | ||
136–174MHz | 400–470, 450–512MHz | |||
Number of channels | Max. 32 channels | |||
Channel spacing | FR5200H | FR6200H | ||
6.25/12.5kHz | 6.25/12.5kHz | |||
Type of emission | 16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E | |||
Frequency stability | ±0.5ppm | |||
Antenna impedance | 50Ω (Type-N × 2) | |||
Operating temperature range | –30˚C to +60˚C; –22˚F to +140˚F | |||
Power supply voltage | 13.6V DC | |||
Current drain (at 13.6 V DC) | ||||
Tx 50W | 11A | 11A | ||
Rx Max. audio/Stand-by | 1.2A/500mA (LCD backlight OFF) | 1.2A/450mA (LCD backlight OFF) | ||
Dimensions (W×H×D) | 483×88×360 mm ; 19.02×3.46×14.17 in | |||
Weight | 10kg ; 22lb (approx.) | |||
Transmitter |
||||
Output power (100% duty cycle) | 50W (adjustable to 5W) | |||
50W (at 20–35˚C, 24 hours) | ||||
Max. frequency deviation | ±5.0 kHz/±2.5 kHz (wide/narrow) | |||
Spurious emissions | 80dB typ. | |||
FM Hum and noise | FR5200H | FR6200H | ||
52/49dB typ. (W/N) | 50/45dB typ. (W/N) | |||
Audio harmonic distortion | 1% typ. (40% deviation) | |||
Digital FSK error | 5% Max. | |||
Microphone impedance | 600Ω (8-pin modular) | |||
Receiver |
||||
FR5200H | FR6200H | |||
Sensitivity | ||||
12dB SINAD | 0.30μV typ. | 0.25μV typ. | ||
5% BER | 0.25μV typ. | 0.25μV typ. | ||
FR5200H | FR6200H | |||
Adjacent channel selectivity | 85/56dB typ. (W/N) | 78/56dB typ. (W/N) | ||
68dB typ. (Digital) | 63dB typ. (Digital) | |||
FR5200H | FR6200H | |||
Spurious response | 80dB (W/N) | 80dB (W/N) | ||
75dBμV emf (Digital) | 80dBμV emf (Digital) | |||
FR5200H | FR6200H | |||
Intermodulation rejection | 78dB typ. (W/N) | 78dB typ. (W/N) | ||
75dBμV typ. emf (Digital) | 75dBμV typ. emf (Digital) | |||
FR5200H | FR6200H | |||
Hum and noise ratio | 52/50/66dB typ. (W/N/D) | 50/45/55dB typ. (W/N/D) | ||
Audio output power | 4.0W typ. at 5% distortion with a 4Ω load | |||
External speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/4Ω |
Supplied Accessories:
- DC power cable
- Handle kit
- Key assign stickers
- Mounting rack
- Spare fuse
Icom IC-FR6200H – Manual
Produk asli Kami distributor langsung Icom . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilayah indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.