Product Description
Icom IC-FR6200H
Karya Mandiri Techindo has a wide range of Icom products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..
Features Icom IC-FR6200H
50W 100% Duty Cycle Operation
- Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides 50W output at 100% duty cycle operation. No internal cooling fan required.
dPMR™ Mode 3 Digital Trunking
- With the external controller, IC-FC5000E, the IC-FR5200H series can be used in a dPMR Mode 3 digital trunking system. A small number of communication channels are automatically and dynamically allocated to accommodate a large number of subscribers. The trunking sites can be interconnected over an IP network.
dPMR™ Mode 2, Analog FM and Mixed Mode
- The IC-FR5200H series is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.
32 Channel Capacity and 5 Programmable Buttons
- The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.
Multiple CTCSS, DTCS Tone and CC Decode
- The IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital CC on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.
19-inch Rack Mount, 2U Height Low Profile Design
- The IC-FR5200H series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.
Other Features
- CW ID transmission
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- ±0.5ppm high frequency stability
- D-SUB 25-pin accessory connector
- Built-in inversion voice scrambler*
- PTT priority setting (Local Mic., external PTT or repeater operation)
- Built-in audio compander*
- 5-Tone and DTMF encoder/decoder*
- Normal and priority scan
- Low voltage alert
- Key assign stickers supplied
* Analog mode only.
Specifications Icom IC-FR6200H
| General | |||
|---|---|---|---|
| Frequency coverage |
|
||
| Number of channels | Max. 32 channels | ||
| Channel spacing |
|
||
| Type of emission | 16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E | ||
| Frequency stability | ±0.5ppm | ||
| Antenna impedance | 50Ω (Type-N × 2) | ||
| Operating temperature range | –30˚C to +60˚C; –22˚F to +140˚F | ||
| Power supply voltage | 13.6V DC | ||
|
Current drain (at 13.6 V DC) |
|
||
| Dimensions (W×H×D) | 483×88×360 mm ; 19.02×3.46×14.17 in | ||
| Weight | 10kg ; 22lb (approx.) | ||
| Transmitter | |||
|---|---|---|---|
| Output power (100% duty cycle) | 50W (adjustable to 5W) 50W (at 20–35˚C, 24 hours) |
||
| Max. frequency deviation | ±5.0 kHz/±2.5 kHz (wide/narrow) | ||
| Spurious emissions | 80dB typ. | ||
| FM Hum and noise |
|
||
| Audio harmonic distortion | 1% typ. (40% deviation) | ||
| Digital FSK error | 5% Max. | ||
| Microphone impedance | 600Ω (8-pin modular) | ||
| Receiver | |||
|---|---|---|---|
| Sensitivity 12dB SINAD 5% BER |
|
||
| Adjacent channel selectivity |
|
||
| Spurious response |
|
||
| Intermodulation rejection |
|
||
| Hum and noise ratio |
|
||
| Audio output power | 4.0W typ. at 5% distortion with a 4Ω load | ||
| External speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/4Ω | ||
Supplied Accessories
- DC power cable
- Handle kit
- Key assign stickers
- Mounting rack
- Spare fuse
Icom IC-FR6200H – Manual
KARYA MANDIRI TECHINDO adalah Supplier Icom IC-FR6200H dan juga menjual Brand Icom. Lihat produk kami lainnya di sini JSI, SGI, SMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].
