Icom IC-FR5200H

Category Brand

Icom IC-FR5200H

  • CW ID transmission
  • Digital voice scrambler provides 15-bit key (about 32,000 codes)
  • ±0.5ppm high frequency stability
  • D-SUB 25-pin accessory connector
  • Built-in inversion voice scrambler*
  • PTT priority setting (Local Mic., external PTT or repeater operation)

Product Description

Icom IC-FR5200H

Karya Mandiri Techindo has a wide range of Icom products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Features Icom IC-FR5200H

  • 50W 100% Duty Cycle Operation

Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides 50W output at 100% duty cycle operation. No internal cooling fan required.

  • dPMR™ Mode 3 Digital Trunking

With the external controller, IC-FC5000E, the IC-FR5200H series can be used in a dPMR Mode 3 digital trunking system. A small number of communication channels are automatically and dynamically allocated to accommodate a large number of subscribers. The trunking sites can be interconnected over an IP network.

  • dPMR™ Mode 2, Analog FM and Mixed Mode

The IC-FR5200H series is compatible with both analog FM mode and dPMR single site conventional mode (Mode 2). Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and dPMR Mode 2 and to transmit either mode depending on the received signal.

  • 32 Channel Capacity and 5 Programmable Buttons

The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.

  • Multiple CTCSS, DTCS Tone and CC Decode

The IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital CC on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.

  • 19-inch Rack Mount, 2U Height Low Profile Design

The IC-FR5200H series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.

Other Features

  • CW ID transmission
  • Digital voice scrambler provides 15-bit key (about 32,000 codes)
  • ±0.5ppm high frequency stability
  • D-SUB 25-pin accessory connector
  • Built-in inversion voice scrambler*
  • PTT priority setting (Local Mic., external PTT or repeater operation)
  • Built-in audio compander*
  • 5-Tone and DTMF encoder/decoder*
  • Normal and priority scan
  • Low voltage alert
  • Key assign stickers supplied

* Analog mode only.

Specifications Icom IC-FR5200H

General

IC-FR5200H
(dPMR Version)
IC-FR6200H
(dPMR Version)
Frequency coverage 136–174 MHz 350–400,
400–470 MHz
Number of channels Max. 32 channels
Channel spacing 6.25/12.5/20/25 kHz
Type of emission 16K0F3E, 14K0F3E, 8K50F3E,
4K00F1E/F1D/F3E
Frequency stability ±0.5ppm
Antenna impedance 50Ω (Type-N × 2)
Operating temperature range –30˚C to +60˚C; –22˚F to +140˚F
Power supply voltage 13.2 V DC
Current drain
(at 13.6V DC)
TX 50W 11A
RX Max. audio/Stand-by 1.2A/550 mA typ.(LCD backlight OFF)
Dimensions (W×H×D) 483×88×360 mm
Weight 10kg (approx.)
Transmitter
IC-FR5200H
(dPMR Version)
IC-FR6200H
(dPMR Version)
Output power 50 W (adjustable to 5 W)
100% duty cycle (at 20–35˚C, 24 hours)
Max. frequency deviation ±5.0/±4.0/±2.5 kHz (W/M/N)
Spurious emissions 0.25 μW (≤1 GHz), 1.0 μW (>1 GHz)
Audio harmonic distortion 1% typ. (40% deviation)
Intermodulation attenuation 40 dB min.
Digital FSK error 5% Max.
Microphone impedance 600 Ω (8-pin modular)
Receiver
IC-FR5200H
(dPMR Version)
IC-FR6200H
(dPMR Version)
Sensitivity Analog –10 dBμV max. (12 dB SINAD)
Digital 0 dBμV emf. max. (1% BER)
Adjacent channel selectivity (W/M/N) 86/83/75 dB typ. 79/76/71 dB typ.
(Digital) 67 dB typ. 63 dB typ.
Spurious response (W/M/N) 80 dB
(Digital) 90 dBμV emf
Intermodulation rejection (W/M/N) 75/75/73 dB typ. 72/72/71 dB typ.
(Digital) 76 dBμV emf typ. 76 dBμV emf typ.
Audio output power 3.5 W min. (5% distortion, 4 Ω load)
External speaker connector 2-conductor 3.5 (d) mm (1/8″)/4Ω

All stated specifications are subject to change without notice or obligation.

 

 

Icom IC-FR5200H – Manual

KARYA MANDIRI TECHINDO adalah Supplier Icom IC-FR5200H dan juga menjual Brand Icom. Lihat produk kami lainnya di sini JSISGISMG atau hubungi kami lewat Whatsapp 0821-3010-0456 atau via email [email protected].


 

Additional Information

Brand

ICOM

Model

IC-FR5200H

Made In

Japan

Weight

6 kg

Product Enquiry

TESTIMONI PELANGGAN

alhamdulillah pesanan sudah sampai di Bengkulu. Pengalaman order di karyamandiritechindo.com Respon cepat. Pengiriman Cepat dan Free, Aman & Terpercaya.

Ibu Natalia Dan Ria
PT. AGricinal

Terimakasih karyamandiritechindo.com, orderannya sudah sampai dengan selamat Kurir Syariftama Express sangat ramah

PT. Bumi Bangun Perkasa
Ibu Rizeki

Order yg kedua, seperti biasa produk sangat memuaskan dan pelayannya ramah, Terimakasih Pak Aji Amanda Semoga di orderan berikutnya tetap TOP

PT. Daruna

Puas banget belanja di karyamandiritechindo.com. pengiriman cepat kualitas produk mantap.

PT. Niaga Andalan Serayat

BUAT PERMINTAAN HARGA