NOVOTEST SH Concrete Rebound Schmidt Hammer
NOVOTEST SH Concrete Rebound Schmidt Hammer
Concrete Rebound Schmidt Hammer NOVOTEST SH has 3 modifications with different impacting energy, so that user can test all kinds of concrete and other building materials.
NOVOTEST TP-2020 Coating Thickness Gauge
NOVOTEST TP-2020 Coating Thickness Gauge
Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).
Novotest TP-1M Coating Thickness Gauge
Novotest TP-1M Coating Thickness Gauge
- Large thickness measurement range
- Convenience and ease in operation
- Shockproof case
- Minimum number of controls: one button – one function
- Graphical display with backlight
- Automatic recognition of probe
- Indication of the connected probe type
- Control of batteries
Novotest UD3701 Ultrasonic Flaw Detector
Novotest UD3701 Ultrasonic Flaw Detector
- Frequency range with continuously adjustable from 0.2 to 10MHz
- Two independently controlled gate (A and B)
- Automatic or manual construction of the TCG curve (32 points)
- Two types of representations of signals: detection and radio
- Build and handling A, B scans
- Modes: envelope, freeze and display of the beam
Novotest UD2301 Mini Ultrasonic Flaw Detector
Novotest UD2301 Mini Ultrasonic Flaw Detector
- Menguji kualitas las dan logam dasar produk.
- Mendeteksi korosi, retak, delaminasi, dan cacat internal lain.
- Menentukan letak dan perkiraan parameter cacat seperti diskontinuitas, retak, dan keseragaman bahan pada produk dari logam, plastik, campuran, dan bahan lain.
- Mengukur ketebalan produk.
Novotest UD4701PA Phased Array Flaw Detector
Novotest UD4701PA Phased Array Flaw Detector
NOVOTEST UD4701PA allows user to assess the state of products or structural elements on site and without pre-testing. This flaw detector is indispensable in such industries like construction, machine building, production of rolled metal, power engineering, research works, chemistry, mining etc.
Novotest VZ-246 Viscosity Flow Cup
Novotest VZ-246 Viscosity Flow Cup
Novotest VZ Viscosity Flow Cup is one of the fundamental parameters of measuring instruments for consumables. It is used to control the viscosity of the applicable liquid, such as varnish, paint, oil, liquid ink, etc. Viscosity Flow Cup NOVOTEST VZ (which is shaped like a cup) – depleted one of the fundamental parameters. The nozzle is used to measure the viscosity of varnish and liquid ink (flexo). The viscosity value is determined by the number of seconds (the time in which the tested liquid runs out of the crater-fill). This tool is equipped with a variation feature of various hole sizes according to the standard.
Coating Thickness Gauge Probes
Coating Thickness Gauge Probes
Optional Probes and Specification Guide for Coating Thickness Gauge
Thickness Gauge Calibration Blocks
Thickness Gauge Calibration Block’s
Set of KUSOT-180 ultrasonic thickness calibration blocks is intended for examination and for initial inspection at manufacturing of ultrasonic contact thickness gauges.
Reference Block’s
Reference Block’s
- Menentukan titik penyisipan osilasi ultrasonik dan jarak dari pelat piezoceramic ke rumah probe dengan akurasi ± 0,5mm
- Tentukan sudut input osilasi ultrasonik dengan akurasi ±1 derajat sudut
- Menentukan zona tak terkendali (mati) (untuk baja) transduser piezoelektrik ultrasonik sinar lurus
- Menentukan linearitas pemindaian ultrasonik secara horizontal
